Overview
The Bilstein 7100 Series AK7114R04 is a reservoir shock absorber for stock trucks, prerunner trucks, race buggies, sand buggies and recreational off-road vehicles. The 7100 line includes versions with and without a remote reservoir, and this part is the reservoir version with a Schrader valve.
The body is 2 inches in diameter and uses monotube gas pressure construction. The dividing piston sits in the reservoir, which allows more shaft movement. Self-adjusting deflecting disc valving and a high-flow piston provide the damping, and the high-flow piston reduces harshness.
No vehicle is named for this part number. The 7100 Series is offered in 8, 10, 12 and 14 inch travel. Measure your current shock and confirm the installed length and travel before buying.
Key features
- Reservoir version of the 7100 Series
- Gas pressure monotube body
- 2 in diameter shock body
- Self-adjusting deflecting disc valving
- High-flow piston that reduces harshness
Service and rebuild basics
A monotube reservoir shock depends on its gas pressure to keep the oil from foaming under heavy damping. When the gas charge leaks or the oil ages, the shock can feel soft at speed and lose control over washboard. Owners who service their dampers often replace seals and the rod guide at the same time, since those parts wear together.
Cleaning the shaft after mud or sand runs and checking the reservoir hose for chafing extends service life. Keep the dust seal and shaft free of grit, and inspect the bushings at each end. For a universal shock, the service work is the same as for any damper, but fitting is the buyer’s responsibility, so confirm the installed length before the old unit comes off.
- Wipe the shaft after off-road runs
- Look for oil on the body or reservoir
- Check the bushings at both ends at each service
Specifications
| Brand | Bilstein |
|---|---|
| Part number | AK7114R04 |
| Shock series | 7100 Series |
| Shock type | Reservoir, monotube gas pressure |
| Body diameter | 2 in |
| Valve | Schrader |
| Travel options in series | 8, 10, 12 and 14 in |
| Fitment type | Universal fit; no vehicles named |
Vehicle fitment
No vehicle is named for this shock, so do not assume it fits a particular truck based on its series or size. Confirm the application, installed length and travel against your vehicle before ordering.
Confirm the installed length and travel match your current shock. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One reservoir shock absorber.









