Overview
The Bilstein 5100 Series 24-285056 is a front shock absorber for the 2014–2024 Ford Expedition, the 2014–2017 Expedition EL, the 2018–2024 Expedition Max and the 2014–2019 Lincoln Navigator models. It provides up to 1 inch of front lift. The wider 5100 design is rated for up to 2.75 inches with OE springs, depending on the application.
The shock is a monotube design with a zinc-plated, snap-ring grooved body. The grooves let the spring seat sit at different heights, and the front lift comes from that spring seat position. The collapsed length is 16.10 inches, the extended length is 20.95 inches and the travel is 4.85 inches. The piston is a digressive design with a self-adjusting deflective disc valve.
The unit is not for vehicles fitted with electronically controlled suspension, so check whether your Expedition or Navigator has that system before ordering. A front shock on a truck with that system will not work as intended.
Key features
- Front lift of up to 1 in for this unit
- Snap-ring grooved coilover body with a 46mm diameter
- Monotube gas-charged construction
- Collapsed length 16.10 in, extended length 20.95 in, travel 4.85 in
- Not for electronically controlled suspension
Before you buy
Front shocks on these full-size SUVs carry a lot of load, especially when towing or driving on washboard roads. A height-adjustable shock must be set with the springs and bump stops in mind, because raising the front end moves the spring seat and changes how much compression travel is available. Choosing a lift height is a balance between clearance and how the vehicle handles on pavement.
Electronically controlled suspension is a separate concern. Many larger SUVs use sensors and dampers that expect a specific shock type, so confirm the suspension type from the vehicle itself before fitting any part. Inspect the existing front shocks for leaks, a worn mount or a noisy top bearing. Replacing shocks in pairs keeps handling even from side to side.
- Look for oil streaks on the shock body
- Check upper mounts and bushings for cracks
- Recheck the front alignment after the lift is set
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-285056 |
| Shock series | 5100 Series (ride height adjustable) |
| Position | Front |
| Body diameter | 46mm |
| Front lift | Up to 1 in |
| Collapsed length | 16.10 in |
| Extended length | 20.95 in |
| Travel | 4.85 in |
| Reservoir | No |
| Finish | Zinc plated |
| Electronic suspension | Not compatible |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2014 through 2024 Ford Expedition, the 2014 through 2017 Expedition EL, and the 2018 through 2024 Expedition Max. It also fits the 2014 and 2015 Lincoln Navigator and the 2017 through 2019 Navigator, along with the Navigator L for the same years.
Ford Expedition models before 2014 and Lincoln Navigator models from 2016 are not covered, and vehicles with electronically controlled suspension are not compatible. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Part 24-285056: one front shock absorber, sold individually.
Installation notes
Check the suspension type before you fit this shock, since it is not for electronically controlled suspension. After installation, confirm the front ride height and alignment match the lift you set.









