Overview
The Bilstein 8100 Series 25-304909 is a front left remote reservoir shock absorber for the 2020–2026 Jeep Gladiator. It is a 60mm large bore direct-fit shock for lifted trucks and SUVs, and it has eyelet mounts at both the top and bottom.
The body is built from aerospace quality billet components. Its 60mm inside diameter gives a higher oil volume, which helps control heat over long distances on rough road surfaces. The monotube design uses velocity sensitive digressive valving tuned for each application, and the large 60mm piston adds comfort and control in all driving conditions.
Each 8100 unit uses a remote or piggyback reservoir for an easy, hassle-free installation. This part covers the front left position only, so confirm the side on your truck before ordering. Compare the installed length of your current front shock before ordering and allow room for the reservoir.
Key features
- Front left position
- 60mm large bore body from billet components
- Remote or piggyback reservoir for higher oil volume
- Monotube design with velocity sensitive digressive valving
- Eyelet top and bottom mounts
Remote reservoir shocks in practice
A remote reservoir shock separates the reservoir from the main body, which gives the oil more room and helps the damper hold steady when the truck is driven hard for long periods. Reservoir placement is a bigger part of the install than with a standard shock, so plan the route before the unit goes on the truck.
Check clearance at full compression and full extension, because the reservoir and hose must stay clear of tires, frame rails and steering components. Front shocks on a lifted truck often work with new springs and bump stops, so review the setup as a whole. Replacing both front shocks together helps the truck stay balanced, and inspect the eyelet bushings during the job.
- Route the hose away from the exhaust
- Confirm clearance at full steering lock
- Replace worn eyelet bushings during install
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-304909 |
| Shock series | 8100 Series |
| Position | Front left |
| Shock type | Monotube reservoir |
| Body diameter | 60mm |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2020–2026 Jeep Gladiator, front left position.
Gladiator models from before 2020, the Jeep Wrangler, and the front right position are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front left remote reservoir shock absorber.
Installation notes
Check the reservoir and hose clearance on your truck before mounting, and confirm you have the left position before ordering.












