Select your vehicle

Bilstein 5100 Series Shock Absorber – 33-318967

Bilstein

$93.25In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shock for 2015–2026 Ford F-150
  • Built for a 4 in rear lift
  • Collapsed length 19.71 in, extended length 31.88 in
  • 46mm zinc-plated smooth body with eyelet mounts

Description

Overview

The Bilstein 5100 Series 33-318967 is a rear shock absorber for the 2015–2026 Ford F-150. It is built for a 4 inch rear lift and is sold individually.

The unit has a 46mm zinc-plated smooth body with eyelet mounts at both ends. Its collapsed length is 19.71 inches and its extended length is 31.88 inches, so measure the rear shock you are replacing and compare it with those figures before ordering. It is a monotube shock kit with a gas-charged design, and the piston is digressive.

A 4 inch rear lift changes the rear ride height considerably, so the shock needs to match the lift you run. It fits the F-150 only.

Key features

  • Rear lift of 4 in
  • Eyelet top and bottom mounts
  • 46mm zinc-plated smooth body
  • Collapsed length 19.71 in and extended length 31.88 in
  • Monotube shock kit with a gas-charged design

Matching the lift height

A lift changes the angle and travel of the rear suspension, so a shock built for one ride height may not suit another. Before ordering, confirm the lift you run and check that the replacement’s lengths suit it. The shock’s job is to control spring movement, and a lift asks it to work through a different range. Keeping the lift consistent across front and rear helps the truck sit level and keeps the shocks working in their intended range.

Replacing rear shocks is a good time to inspect the rest of the suspension. Look at the springs, shackles, bushings and bump stops for wear or sag. Worn parts can change how the new shock loads and reduce its effect. Fit the shock with the truck at its normal ride height so the mounts line up without strain, and tighten the fasteners to the vehicle’s specification.

  • Measure ride height on both sides before and after install
  • Check that brake lines and wiring clear the shock
  • Inspect the upper and lower mounts for wear
  • Keep front and rear lift settings in line

Specifications

Brand Bilstein
Part number 33-318967
Shock series 5100 Series
Position Rear
Rear lift 4 in
Body diameter 46mm
Collapsed length 19.71 in
Extended length 31.88 in
Top mount Eyelet
Bottom mount Eyelet
Shock type Monotube shock kit, gas-charged
Fitment type Direct fit

Vehicle fitment

It fits the 2015 through 2026 Ford F-150, across the model years in that range.

Ford F-150 models from before 2015, and the Ford F-250 and F-350 Super Duty trucks, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Part 33-318967: one rear shock absorber, sold individually.

Installation notes

Confirm the 4 inch rear lift on your truck before ordering, and check the rear ride height after installation.

Fitment

VehicleYearsTrims
Ford F-1502015–2026King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 33-318967 fit a 2018 Ford F-150?

Yes. This rear shock fits the 2015 to 2026 Ford F-150, so a 2018 model is covered. Confirm the rear lift is 4 inches before ordering.

Is this shock sold in pairs?

No. It is sold individually, so a rear pair needs two orders. Fit one to each rear side so the truck sits level.

What lengths should I check before buying?

The collapsed length is 19.71 inches and the extended length is 31.88 inches. Measure your current rear shock at both mounts and match those figures before you order the 33-318967.

Should the front shocks be changed when the rear shocks are replaced?

Not always. Front and rear dampers work as a set, so check the front shocks for leaks and wear at the same time. If the front is worn, replacing it alongside the rear keeps the ride balanced. Confirm your lift setup before deciding.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon