Overview
The Bilstein 4600 Series Shock Absorber, part number 24-139168, is a front shock for the 2007–2008 Dodge Nitro (R/T, SLT, SXT) and the 2002–2012 Jeep Liberty (KJ) in several trims. It is a gas-charged monotube unit with a precision formed body, a direct fit and no lift or drop, for the front position.
The shock body is formed by a seamless extrusion process that gives high strength and tight finish tolerances. It is joined to an induction hardened steel shaft that is chrome plated and polished, with machined valving components and high quality seals. This shock carries a limited lifetime warranty.
The fitment covers two vehicles, the 2007–2008 Dodge Nitro and the 2002–2012 Jeep Liberty (KJ), each with its own trim set. When replacing a shock, compare the front position, the 4600 Series name and the shock’s construction against the unit you are replacing.
Key features
- Precision formed, seamless extruded shock body
- Induction hardened steel shaft, chrome plated and polished
- Machined valving components
- High quality seals
- Front position, direct fit, 0 in. lift or drop
- Gas-charged design
- Limited lifetime warranty from Bilstein.
Front shocks for everyday driving
Front shocks help keep the tires on the road over uneven pavement and control steering as the suspension compresses. On a compact SUV or truck, a worn front shock can cause nose dive under braking, floating over dips and a loose feel on turns. Because the front carries steering weight, the damper should respond evenly on both sides.
Inspect the shock mounts, bushings and tie rod ends at the same time, since loose parts can mimic a bad shock. Check the shaft for pitting or scoring and look for oil on the body. Read the warranty terms before installing, and keep the purchase receipt in case a claim is needed.
- Nose dive under braking
- Floating after dips
- Oil on the body
- Pitted or scored shaft
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-139168 |
| UPC | 651860582498 |
| Shock series | 4600 Series |
| Position | Front |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Lift height | 0 in. lift or drop |
| Shaft | Induction hardened steel, chrome plated and polished |
| Valving | Machined components |
| Seals | High quality |
| Warranty | Limited lifetime. |
Vehicle fitment
It fits the 2007–2008 Dodge Nitro in the R/T, SLT and SXT trims. It fits the 2002–2012 Jeep Liberty (KJ) in the 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition and Sport trims.
The list names only the Dodge Nitro and the Jeep Liberty (KJ), so other Dodge and Jeep models are not covered by it. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber described above.
Not included: Verify the mounting hardware your installation needs ahead of time.









