Overview
The Bilstein 24-186933 is a rear Bilstein 4600 Series shock absorber, a gas-charged monotube unit with a 2 in body diameter and a yellow finish. Its manufacturer fitment list names the 2007–2014 Chevrolet Tahoe and 2007–2014 GMC Yukon.
Shock absorbers control how quickly the suspension compresses and rebounds after each bump, and a monotube layout keeps all of that damping in one pressure tube. The floating dividing piston lets the damping oil expand as it heats, which Bilstein says reduces foaming and loss of viscosity, so damping stays steadier when temperatures climb. Boots are included to protect the shaft.
Key features
- Gas-charged monotube body with a dividing piston that manages oil expansion as temperatures rise
- Piston valving that can be tuned separately for compression and rebound damping
- Tube extruded to a tight peak-to-valley tolerance for consistent wall thickness
- Seamless monotube construction, which Bilstein describes as strong and efficient at moving heat outward
- Fewer internal parts than many conventional twin-tube and road-sensing designs.
- It is a direct fit with 0 in lift/drop, so it is not a lift shock.
- Boots included for shaft protection
Monotube shocks and heat
A monotube shock keeps all of its damping in one pressure tube, so heat travels outward through the body rather than building inside a reservoir. That makes it a practical choice for sustained load and steady highway driving, especially when the vehicle tows or climbs grades. Consistent damping helps the tires stay in contact with the road over rough surfaces.
Seals, boots and the pressure tube are the parts most affected by road grit and temperature swings, so a visual check of the boot and shaft after a season of use is worthwhile. A shock that leaks oil, feels soft over bumps or lets the body bounce after a stop is usually due for replacement.
- Look for oil streaks along the tube
- Check the boot for cracks or splits
- Compare left and right units for feel
- Inspect the mounting bushings for play
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186933 |
| UPC | 651860591308 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift/drop | 0 in (no lift) |
Vehicle fitment
It is a direct fit for the 2007–2014 Chevrolet Tahoe in Hybrid, LS, LT, LTZ and SSV trims, and for the 2007–2014 GMC Yukon in Hybrid, SLE and SLT trims. The rear position applies to all of these.
Confirm fit for your vehicle’s year, model and trim before ordering, since fit is confirmed only for the 2007–2014 Tahoe and Yukon trims named above.
Installation notes
Gas-charged shocks are under pressure, so never heat, puncture or disassemble the body. Keep the boot seated while the mounts are fastened, and make sure both eyes move freely before the vehicle is loaded and driven.
What’s included
One rear Bilstein 4600 Series monotube shock absorber with boots.









