Overview
The Bilstein 24-131582 is a 46mm monotube gas charged shock absorber from the 4600 Series, made for the front of the 2003–2006 Ford Expedition. It is a direct fit for the Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT and XLT Sport trims.
Bilstein’s monotube design runs a single tube with a dividing piston and a gas charge. The piston lets the oil expand as heat builds, which limits foaming and thinning of the oil, so the shock keeps its full damping as temperatures rise. The yellow finish is shown on this model, and the design aims at steady control and ride comfort over the life of the shock.
Key features
- Monotube body with a gas charge, letting heat pass from the oil through the outer shock body.
- Dividing piston allows the oil to expand as temperatures climb, reducing aeration (foaming) and viscosity loss.
- Seamless monotube tube made with a special extrusion method for tight peak-to-valley tolerance and consistent wall thickness.
- Piston head design lets compression and rebound damping be tuned independently.
- Fewer parts than most conventional twin tube and so-called road sensing shock designs.
Signs a front shock is worn
A front shock controls how the suspension compresses and rebounds, working with the springs to keep the tires planted over bumps. On a full-size truck or SUV the front end also carries much of the braking and steering load, so a worn damper often shows up as nose dive under braking, floating over dips, or vague steering at highway speed.
Look at the body for oil seepage, check the upper and lower mounts for play, and watch the front tires for cupping or uneven wear. Replace the mounts or bushings if they are worn, because a new shock on worn rubber will still feel loose. When one front shock fails, the other is usually near the end of its life, so replacing them as a pair keeps the damping even from side to side.
- Oil seepage on the shock body
- Bouncing after a dip or bump
- Clunking from the top or bottom mount
- Cupped or uneven front tire wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-131582 |
| UPC | 651860660684 |
| Old part number | BILF4-BE5-D158-H1 |
| Shock series | 4600 Series |
| Shock type | Monotube, gas charged |
| Size | 46mm |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/0 in. Lift/Drop |
| Finish | Yellow |
Vehicle fitment
It fits the 2003–2006 Ford Expedition in the Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT and XLT Sport trims, as a direct fit for the front position.
Other Expedition model years outside 2003–2006 and trims not named in the list are not covered. Confirm your year, model and trim before ordering.
Installation notes
Gas-charged shocks hold pressurized gas, so the body should not be heated, punctured or taken apart. Confirm the front position matches the old unit before fitting this shock.
What’s included
The package is one Bilstein 4600 Series front gas charged monotube shock absorber, part number 24-131582. Check the package contents against your installation before starting.









