Overview
The B&W Trailer Hitch GNRC900 is a center section for B&W’s Turnoverball gooseneck hitch, made for Dodge Ram 2500 and 3500 pickups from 1994 through 2018. It mounts to the truck’s existing frame bolt holes and carries a solid, machined 2-5/16 inch ball, rated for 30,000 lb gross trailer weight (GTW) and 7,500 lb vertical tongue weight (VTW).
Gooseneck towing puts the trailer’s load over the truck’s rear axle, so the hitch that receives that load needs a secure mount and a strong ball. The GNRC900 is built around that job, with a machined ball, a steel locking pin and a powder-coated finish. It is a center section only, so it suits owners who already have or are buying a compatible Turnoverball gooseneck hitch.
Key features
- Mounts directly to existing bolt holes in the frame, with no drilling or welding required
- Solid, machined 2-5/16 inch ball
- Spring-loaded steel locking pin, 5/8 inch thick
- Durable gray powder coat finish
- Rated for 30,000 lb GTW and 7,500 lb VTW
- Made in the USA
Gooseneck hookup checks
The gooseneck center section needs a truck with a sound frame and a bed layout that clears the trailer’s kingpin. Before hookup, look at the frame bolt holes for cracks or elongation, and check the bed floor and tailgate for clearance once the trailer is coupled. Use the truck’s own towing ratings as the upper limit rather than the center section rating alone.
Turnoverball hitches are simple, but they work best when kept clean and checked regularly. Wipe grit off the ball, check the spring-loaded pin for wear, and make sure the pin returns fully. Re-check the frame fasteners after a few trips with a new trailer, especially on rough roads, and replace any ball that shows cracks, deep pitting or flat spots.
- Inspect frame bolt holes for cracks before hookup
- Confirm the pin seats and springs back fully
- Clean and check the ball after each trip
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | GNRC900 |
| UPC | 852089001696 |
| Product type | Gooseneck center section for Turnoverball gooseneck hitch |
| Ball | Solid, machined 2-5/16 inch |
| Locking pin | Spring-loaded steel, 5/8 inch thick |
| Finish | Durable gray powder coat |
| Gross trailer weight (GTW) | 30,000 lb |
| Vertical tongue weight (VTW) | 7,500 lb |
| Mounting | Existing frame bolt holes |
| Drilling or welding | Not required |
| Country of manufacture | USA |
Vehicle fitment
The manufacturer fitment list covers the following trucks:
- 1994–2010 Dodge Ram 2500 (Base, Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4)
- 1994–2010 Dodge Ram 3500 (Base, Laramie, SLT, ST, SXT, Sport, TRX4)
- 2011–2018 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman)
- 2011–2018 Ram 3500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman)
The list does not include the Ram 1500 or Dodge trucks outside the years shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the section bolts to existing frame holes, no drilling or welding is needed. Gooseneck loads are heavy, so check the truck’s towing ratings against the trailer before hooking up.
What’s included
The center section comes with its ball and a spring-loaded locking pin. Verify the included pin before fitting the section.
Not included: the Turnoverball gooseneck hitch this center section is designed to work with, and the gooseneck trailer coupler.







