Overview
The B&W GNRC817 is a turnoverball gooseneck center section designed for 4 wheel drive 2017–2018 Ford F-250 Super Duty and F-350 Super Duty trucks. It takes a solid, machined 2-5/16 inch ball and carries a 30,000 lb GTW and 7,500 lb VTW rating.
Owners of these trucks who want a gooseneck hitch with a spring loaded pin will find the key specs below. The center section is made in the USA.
Key features
- Built for 4 wheel drive 2017–2018 Ford F-250 and F-350 trucks
- Solid, machined 2-5/16 inch ball
- Spring loaded steel locking pin, 5/8 inch thick
- Durable gray powder coat finish
- Attaches through the existing frame bolt holes
- Made in the USA
Gooseneck setup checks
Choosing a gooseneck center section starts with the truck. Four wheel drive changes the frame, the suspension height and the clearance around the hitch, so a center section built for that layout should not be swapped onto a two-wheel-drive truck. Think about the bed as well: the turnoverball sits in the bed, and the trailer’s kingpin and ball height must work with the bed floor and tailgate.
Once it is installed, the center section becomes part of the towing system. Check the locking pin before each hookup, and make sure the coupler latches fully on the ball. Frame holes can loosen under heavy loads, so re-check the fasteners after the first trips and at regular intervals. Ball wear is normal, but cracks or deep pitting mean the ball should be replaced.
- Confirm drive type matches the center section
- Check bed floor clearance before hookup
- Re-check frame fasteners after the first trips
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | GNRC817 |
| UPC | 843233003871 |
| Hitch type | Turnoverball gooseneck center section |
| Drive | 4 wheel drive |
| Ball | 2-5/16 inch, solid and machined |
| Gross trailer weight rating | 30,000 lb GTW |
| Vertical tongue weight rating | 7,500 lb VTW |
| Locking pin | 5/8 inch thick, spring loaded steel |
| Finish | Durable gray powder coat |
| Origin | Made in the USA |
Vehicle fitment
It fits 2017–2018 Ford F-250 Super Duty and 2017–2018 Ford F-350 Super Duty trucks, with trims including King Ranch, Lariat, Limited, Platinum, XL and XLT.
Trucks without 4 wheel drive, other Ford F-250 or F-350 years, and the 2007–2016 Super Duty generation are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The center section mounts through the existing frame holes on 2017–2018 Super Duty trucks, so no drilling or welding is needed. Confirm bolt sizes and torque values with your installation before fitting it.
What’s included
The center section comes with its ball and locking pin.
Not included: The gooseneck trailer is not included. Check the mounting hardware against your installation before starting.







