Overview
The B&W GNRC800 is a turnoverball gooseneck hitch center section for the 2-5/16 inch ball setup. It mounts to the truck frame so a gooseneck trailer can connect to the ball, and the ratings are 30,000 lb GTW and 7,500 lb VTW.
It fits Chevrolet C1500, C2500, C3500, K1500, K2500 and K3500 models from 1988–2000, Ford F-150 from 1995–2004 including the F-150 Lightning, and Ford F-250 and F-350 Super Duty from 2007–2016. It is made in the USA with a durable gray powder coat finish.
Key features
- Solid, machined 2-5/16 inch ball
- Spring loaded steel locking pin, 5/8 inch thick
- Durable gray powder coat finish
- Bolts into the existing frame holes
- No drilling or welding required
- Made in the USA
Towing with a gooseneck
A gooseneck trailer places its load over the truck’s rear axle, so the center section carries a large share of the hitch weight through the frame. Before every trip, check the truck’s towing and payload ratings against the trailer. Keep the ball clean and free of grease, since a film can let the coupler shift under braking.
The turnoverball design lets the ball sit flush when not in use, which keeps the bed clear. Inspect the locking pin for wear and make sure it seats fully. Over time, frame bolt holes and fasteners can loosen under repeated towing, so re-check them periodically. Replace a cracked ball or bent pin rather than running it.
- Check the locking pin seats fully before towing
- Keep the ball clean and lightly lubricated
- Re-check frame bolts after the first few trips
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | GNRC800 |
| UPC | 852089001689 |
| Hitch type | Turnoverball gooseneck center section |
| Ball | 2-5/16 inch, solid and machined |
| Gross trailer weight rating | 30,000 lb GTW |
| Vertical tongue weight rating | 7,500 lb VTW |
| Locking pin | 5/8 inch thick, spring loaded steel |
| Finish | Durable gray powder coat |
| Origin | Made in the USA |
Vehicle fitment
It fits Chevrolet C1500, C2500, C3500, K1500, K2500 and K3500 models from 1988 to 2000, Ford F-150 from 1995 to 2004 with the F-150 Lightning, and Ford F-250 and F-350 Super Duty from 2007 to 2016, with specific trims for each.
GMC models and 2017 and later Super Duty trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The center section bolts into existing frame holes, so no drilling or welding is needed. Gooseneck loads are heavy, so verify the mounting hardware is fully seated before towing.
What’s included
The center section comes with its solid ball and spring loaded locking pin. Confirm the mounting bolts against your frame before installing.
Not included: The gooseneck trailer itself.









