Overview
The Gates Corporation G-Force C12 CVT Belt, part number 23C4140, is a carbon corded belt for the continuously variable transmission of recreational and utility all-terrain vehicles. It fits several 2014–2015 Polaris Ranger models, including the Ranger 570 Crew, Ranger 900 Crew and Ranger 900 XP, along with the 2014 Ranger 800 Crew and the 2015 Ranger 900-6 Crew.
The belt measures 42.625 inches around its outside circumference, with a 1.25-inch top width and a 26-degree angle. It is double notched, and Gates says its G-Force CVT belts use double- or single-cog designs for an exact match to the OEM belt.
The G-Force C12 was designed with finite element analysis, a computer method for stress and durability, and it uses current construction, material and measuring methods. Testing was run in controlled environments and on race vehicles.
Key features
- Carbon corded belt construction
- Designed with finite element analysis for strength, durability and flexibility
- Built for a continuously variable transmission (CVT) drive
- Double notched design, matched to the OEM belt
- Gates says no clutching adjustment is necessary at installation
- Tested in controlled environments and on race vehicles
Belt wear and inspection
A CVT belt works under heat, friction and changing load, so its wear shows up slowly. Cracks along the edges, glazed or shiny faces, fraying cords and a narrowed top width all point to a belt that is near the end of its service life. Measuring the old belt before buying is the simplest way to avoid a mismatch.
The belt runs between the primary and secondary clutches, so the clutch faces, sheaves and clutch weights are worth inspecting when the belt is changed. Debris, oil or sand in the clutch area can speed up wear on a new belt. Keep the cover and intake areas clean and check the belt after deep water or mud runs.
- Check for cracks and glazing on the belt faces
- Inspect sheave faces for grooves or debris
- Clean the clutch area when the belt is out
- Replace a belt that shows fraying cords
Specifications
| Brand | Gates Corporation |
|---|---|
| Part number | 23C4140 |
| Product line | G-Force C12 CVT belt |
| Material | Carbon corded belt |
| Outside circumference | 42.625 inches |
| Top width | 1.25 inches |
| Angle | 26 degrees |
| Notched | No |
| Double notched | Yes |
Vehicle fitment
It fits the 2014-2015 Polaris Ranger 570 Crew, the 2014 Ranger 800 Crew, the 2014-2015 Ranger 900 Crew and Ranger 900 XP, and the 2015 Ranger 900-6 Crew. Other Ranger models and years are not part of this fitment.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gates says no clutching adjustments are necessary at installation. Measure the old belt and compare its size before you fit the new one.
What’s included
One Gates G-Force C12 CVT belt, part number 23C4140.









