Select your vehicle

Gates Corporation G Force C12 CVT Belt – 26C4140

Gates Corporation

$133.70In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 2:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Gates G-Force C12 CVT belt, part number 26C4140
  • Carbon corded belt, 42.57-inch outside circumference, 1.261-inch top width
  • Double notched with a 26-degree angle for the CVT drive
  • Fits 2016-2017 Polaris RZR 4 900 and 2016-2019 RZR 900 and RZR S 900

Description

Overview

The Gates Corporation G-Force C12 CVT Belt, part number 26C4140, is a carbon corded belt for the CVT drive of Polaris RZR side-by-side vehicles. It fits the 2016-2017 Polaris RZR 4 900, the 2016-2019 Polaris RZR 900 and the 2016-2019 Polaris RZR S 900.

The belt has a 42.57-inch outside circumference, a 1.261-inch top width and a 26-degree angle. It is double notched, which describes its cog design.

The belt is designed for strength, durability and flexibility, using current construction, material and measuring technology. Testing was run in controlled environments and on race vehicles.

Key features

  • Carbon corded construction
  • Double notched cog design
  • Continuously variable transmission (CVT) belt
  • Engineered for strength, durability and flexibility
  • No clutching adjustment is needed when the belt is installed.
  • Tested in controlled environments and on race vehicles

Signs of a worn belt

A worn CVT belt gives early warnings before it fails. The vehicle may feel slow to move off the line, lose power on hills or make a squeal or slip under load. Any of these changes is a reason to inspect the drive before a belt fails in the middle of a trip.

Inspect the belt by removing the cover and checking the edges, faces and top width against a new belt. Glazed or cracked faces and frayed cords are common signs of heat stress. Check the drive and driven sheaves at the same time, since uneven sheave faces can wear a belt quickly even when it is new.

  • Check top width against a new belt
  • Look for glazing or cracks on the faces
  • Inspect the sheaves for debris and grooves
  • Replace the belt if the cords are fraying

Specifications

Brand Gates Corporation
Part number 26C4140
Product line G-Force C12 CVT belt
Material Carbon corded belt
Outside circumference 42.57 inches
Top width 1.261 inches
Angle 26 degrees
Notched No
Double notched Yes

Vehicle fitment

It fits the 2016-2017 Polaris RZR 4 900, the 2016-2019 Polaris RZR 900 and the 2016-2019 Polaris RZR S 900. Other RZR models and years are not part of this fitment.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Before installing the new belt, measure the outside circumference of the old belt and compare it with the 42.57-inch figure.

What’s included

One Gates G-Force C12 CVT belt, part number 26C4140.

Fitment

VehicleYearsTrims
Polaris RZR 4 9002016–2017EPS Base
Polaris RZR 9002016–2019Base, EPS Base, EPS Trail Base, EPS Trail Fox Edition LE Base, EPS XC Edition Base
Polaris RZR S 9002016–2019Base, EPS Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this belt fit the RZR S 900?

Yes. It fits the 2016 to 2019 Polaris RZR S 900, which is one of the models covered. The belt is double notched with a 26-degree angle, and no clutch adjustment is needed when installed.

Does this belt need clutch setup?

No clutch adjustment is needed at installation. The belt is carbon corded with a 42.57-inch outside circumference and a 1.261-inch top width, so measure the old belt before fitting.

Which RZR 900 models does the 26C4140 fit?

It fits the 2016 to 2017 RZR 4 900 and the 2016 to 2019 RZR 900 and RZR S 900, including EPS versions. Other years and RZR models are not part of this fitment.

Can a RZR belt be used after it has slipped once?

A belt that slipped once may be worn, so inspect it before using the vehicle hard. Look for glazing, cracks and a narrowed top width. If any of these signs show, replace the belt rather than running it further.

Should the clutch area be cleaned when the belt is replaced?

Yes, cleaning the clutch area is a good step whenever the belt is changed. Remove dust, sand and debris from the sheaves and cover, since they can speed up wear on the new belt. Keep the area clear of oil and grease.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon