Select your vehicle

Gates Corporation G Force C12 CVT Belt – 47C4266

Gates Corporation

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2016 Polaris RZR XP Turbo and 2016 Polaris RZR XP 4 Turbo
  • Carbon corded, double notched CVT drive belt
  • Outside circumference 43.831 in, top width 1.47 in, 26-degree angle
  • Built to match the OEM belt.

Description

Overview

The Gates G-Force C12 CVT belt, part number GAT47C4266, is a carbon corded, double notched drive belt for the 2016 Polaris RZR XP Turbo and the 2016 Polaris RZR XP 4 Turbo.

Gates built the belt with finite element analysis (FEA) and designs its C12 belts as an exact match to the original equipment (OEM) part. It is meant for the continuously variable transmission (CVT) in these side-by-sides. Gates reports testing in controlled environments and on race vehicles, with a 1.47-inch top width and a 26-degree angle.

Key features

  • Carbon corded belt construction
  • Double notched, with no single notch
  • Designed with finite element analysis for strength, durability and flexibility
  • It is designed to match the OEM belt.
  • Tested in controlled environments and on race vehicles, Gates says

Belt wear and inspection

A CVT belt transmits engine power between the drive and driven clutches, so it carries the full load every time the drive engages and disengages. Over time the belt edges and cord can wear, and a glazed or cracked surface often appears before any slipping is noticed. Inspect the belt when the vehicle is cool, looking for fraying, missing material and uneven wear across its width.

Belts are commonly replaced together with the clutch rollers and sheaves, because worn sheaves can wear a new belt quickly. Keep the clutch area free of mud and sand, and check the clutch cover seal after the belt is changed. Keeping the intake and clutch housing clear of debris helps the belt run cooler during long trail sessions, which is when heat most often shortens belt life.

  • Check for fraying and glazing on each belt edge
  • Inspect the sheaves whenever the belt is replaced
  • Keep mud and sand out of the clutch housing

Specifications

Brand Gates Corporation
Part number GAT47C4266
Material Carbon corded belt
Outside circumference 43.831 in
Top width 1.47 in
Belt angle 26 degrees
Notched No
Double notched Yes

Vehicle fitment

The fitment for this belt covers the 2016 Polaris RZR XP Turbo and the 2016 Polaris RZR XP 4 Turbo, and no other years.

Other RZR years, including 2017 through 2019 models, are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Polaris RZR XP 4 Turbo2016EPS Base
Polaris RZR XP Turbo2016EPS Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this belt fit a 2017 Polaris RZR XP Turbo?

No. This belt fits 2016 models only. The 2017 RZR XP Turbo falls outside those years, so check fit against your year, model and trim before buying.

What is the top width of this Gates belt?

The top width is 1.47 inches. The outside circumference is 43.831 inches, and the belt angle is 26 degrees. These figures apply to part number GAT47C4266, so compare them with the belt you are replacing.

Does this belt work on a Can-Am Maverick?

No. The fitment covers only the 2016 Polaris RZR XP Turbo and the 2016 Polaris RZR XP 4 Turbo, and Can-Am models are not part of that fitment.

How can I tell when the CVT belt needs replacing?

Replace the belt when the edges fray, the surface cracks or glazes, or the vehicle loses drive under load. Inspect it regularly, especially after mud or sand riding, since debris speeds up wear on both the belt and the clutch surfaces.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon