Overview
The kit is a direct replacement for the engine mount tube, engine mounts and transmission mount on Polaris RZR models. It fits the 2018-2020 Polaris RZR RS1 and the 2016-2020 Polaris RZR XP 4 Turbo and RZR XP Turbo. It is built to replace the original engine mount tube.
The engine mount tube is fabricated from chromoly. The billet mounts are CNC machined, black anodized and laser engraved. Each mount uses a heavy-duty isolator material to support the drivetrain and absorb vibration, which is the job the kit is designed to do in place of the original mounts.
The engine mount tube bolts are upgraded to 1/2-inch cross-drilled hardware, and safety wire is included.
Key features
- Chromoly engine mount tube
- CNC machined billet mounts
- Black anodized finish with laser engraving
- Heavy-duty isolator material on each mount
- Upgraded 1/2-inch cross-drilled tube bolts
- Safety wire included
- Designed to replace the original engine mount tube, engine mounts and transmission mount
Supporting the drivetrain
Engine and transmission mounts carry the weight of the drivetrain and control how it moves under load. When they wear, the engine can shift, the shifter may feel loose, and the drivetrain may knock on acceleration or during hard throttle changes. Watch for cracked isolators, torn rubber, and bolts that have loosened or backed out.
Before pulling the old mounts, support the engine and transmission with a stand or jack and a block of wood so nothing drops when the mounts come out. Mark the orientation of brackets and hardware. Once the new parts are in, check that the drivetrain sits square and that no hoses, wiring or exhaust parts are under strain.
Because the mounts work with the tube and driveline, consider replacing related worn parts at the same time, such as driveline bushings and worn fasteners. Tighten new bolts to the torque in your service manual, and check them again after the first few rides.
Specifications
| Brand | Cognito Motorsports |
|---|---|
| Part number | 360-P0720 |
| Kit replaces | Engine mount tube, engine mounts and transmission mount |
| Engine mount tube material | Chromoly |
| Mount construction | CNC machined billet, black anodized, laser engraved |
| Isolators | Heavy-duty isolator material |
| Tube bolts | Upgraded 1/2-inch cross-drilled hardware |
| Safety wire | Included |
Vehicle fitment
The kit fits the 2018-2020 Polaris RZR RS1, the 2016-2020 Polaris RZR XP 4 Turbo and the 2016-2020 Polaris RZR XP Turbo. Other RZR models and years outside those ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the engine and transmission mounts means the drivetrain must be supported while the original parts come out. Plan for that support before starting the job.
What’s included
The kit includes the replacement engine mount tube, engine mounts and transmission mount, along with the upgraded tube bolts and safety wire.










