Overview
The K&N Replacement Air Filter, part number CM-9715 (also shown as K/NCM-9715), is a washable cotton air filter for off-road, motocross, ATV, UTV and side-by-side engines. It fits the 2015-2017 Can-Am Maverick and Maverick Max and the 2017 Can-Am Maverick X3 and X3 Max. It fits directly into the OEM air box, using a sealing bead made for that application.
K&N says its off-road filters are built for extended use in dirty, dusty riding, and that they keep carburetion clean even at high altitude. Generally, K&N says, no jet changes are needed when only the filter element is replaced.
The filter uses pleated cotton media with a large filtration area, which K&N says gives low restriction, high capacity and long service intervals. Several layers of woven cotton gauze add filtration, and the element is washable and reusable.
Key features
- Pleated cotton media for a large filtration area
- Multiple layers of woven cotton gauze
- Application-specific sealing bead for a precise fit in the OEM air box
- No fuel management modifications are required.
- Washable and reusable; most are pre-oiled and ready to ride
- Designed to increase horsepower and acceleration.
Cleaning and air filter care
A clean air filter is one of the simplest parts to maintain on a UTV or side-by-side. The engine draws all of its combustion air through the filter, so dust that passes a worn or clogged element reaches the throttle body and cylinders. Riders who work in dust, sand or mud usually need to service a filter more often than riders on paved roads.
A washable cotton element like this one can be cleaned and oiled again rather than replaced each time. Clean it with the cleaner and oil made for cotton air filters, let it dry fully, and re-oil lightly before reinstalling. Inspect the sealing bead and the frame for tears, since an air leak around the edge lets unfiltered air into the engine even when the media is clean.
Signs the filter needs attention include visible dirt packed into the pleats, weaker throttle response, or a dusty film inside the air box. When the element no longer seals, replace it or the intake gasket before riding. Keep a spare element on hand for long trips in harsh terrain.
Specifications
| Brand | K&N |
|---|---|
| Part number | K/NCM-9715 |
| Product type | Replacement air filter element |
| Media | Pleated cotton with woven cotton gauze layers |
| Fit | Directly into the OEM air box |
| Cleaning | Washable and reusable |
| Oil | Most are pre-oiled |
| Warranty | One year limited |
Vehicle fitment
It fits the 2015-2017 Can-Am Maverick and Maverick Max, and the 2017 Can-Am Maverick X3 and Maverick X3 Max. Make sure the fit matches your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The filter fits directly into the OEM air box with its sealing bead. No fuel management modifications are needed, and jet changes are generally not required with the filter element alone.
What’s included
One K&N replacement air filter element, part number CM-9715.










