UTV Parts & Accessories
Showing 49–60 of 399 resultsSorted by popularity
-
UTV Bumpers
Rough Country UTV LED Bumper Wings (Black) – 93044
- Two 6-inch Slimline LED light bars, 2,880 lumens each
- 11-gauge powder coated steel bumper panels
- IP67 waterproof rating
- Die cast aluminum housings with a moisture breather
- Installs on the factory front bumper for Polaris Ranger models
SKU: R/C93044 -
UTV Work/Task Accessories
Rough Country Tailgate Vent – 10514
- Fits 2007–2018 Jeep Wrangler (JK) 2-door and 4-door (Unlimited) models
- Louvered black powder coat cover for the rear vent after the spare tire carrier is removed
- Bolt-on with the existing tailgate mounting holes and hardware, no drilling
- Grommets included to plug unused tailgate holes
- Lifetime replacement warranty
SKU: R/C10514 -
-
UTV Storage
Rough Country Front Door Storage Bags – 93070
- Fits the 2020–2024 Polaris RZR PRO XP and RZR PRO XP 4 models
- Sold as a pair, black 1680D Oxford nylon
- Extended, reverse coil zippers with double SBS zippers
- Removable knee pad and outer mesh pocket
- Rough Country part number R/C93070, 23.6 by 16.1 inches
SKU: R/C93070 -
UTV Lift Kits
Rough Country 3″ Kawaski Lift Kit – 94002
- Rough Country 3-inch lift kit for Kawasaki Mule UTVs, part number R/C94002
- Full 3 inches of lift front and rear with powder-coated brackets
- Bolt-on installation, which Rough Country describes as 100% bolt-on
- Room for tires up to 28 inches.
- Fitment list covers Mule PRO-DX, PRO-DXT, PRO-FX and other models from 2015 to 2026
SKU: R/C94002 -
UTV Lift Kits
Rough Country 3″ Can-Am Lift Kit – 97035
- Rough Country 3-inch aluminum lift kit for Can-Am Defender UTVs, part number R/C97035
- Full 3 inches of lift from front to rear for increased ride height
- Room for tires up to 28 inches
- Requires a spring compressor for strut disassembly
SKU: R/C97035 -
UTV Lift Kits
Rough Country 3″ Can-Am Lift Kit – 97002
- Rough Country 3-inch aluminum lift kit for Can-Am Defender UTVs, part number R/C97002
- Full 3 inches of lift from front to rear with front and rear preload spacers
- Clearance for tires up to 28 inches.
- Requires a spring compressor for strut disassembly
- Covers Defender models from 2016 to 2026; Lone Star and X mr models are excluded
SKU: R/C97002 -
UTV Light Mounts,Wires and Harnesses
Rigid Industries Rock Light Kit – 46539
- Rigid Industries rock light mounts, part number 46539, for the 2014-2016 Polaris RZR XP 1000
- Bolt into each fender well on the 2014-2016 Polaris RZR XP 1000
- Pairs with any colored Rock Light Kit Rigid offers, sold separately
- Stainless steel with black powder coat and all necessary hardware
SKU: RIG46539 -
-
UTV Light Mounts,Wires and Harnesses
Rigid Industries Headlight Mount – 46554
- Rigid Industries headlight mount kit, part number 46554
- Holds four Rigid D-Series lights, two per side, on the 2014-2016 Polaris RZR XP 1000
- Two plug-and-play wire harness adaptors and all mounting hardware
- Stainless steel mounts with a powder coat that matches Rigid lights
- Professional installation recommended; lights sold separately
SKU: RIG46554 -
UTV Light Mounts,Wires and Harnesses
Rigid Industries B-Pillar Light Mount – 46533
- Rigid Industries B-Pillar light mount, part number 46533
- Stainless steel bracket for D-Series lights, fits the 2014-2016 Polaris RZR XP 1000
- Up to 3096 raw lumens for back-up or area lighting
- Lights sold separately
SKU: RIG46533 -
How UTV parts differ from truck parts
Side-by-sides are built around narrow, light chassis with short-travel or long-travel suspension, and parts are rarely interchangeable between brands. Bolt patterns are often 4 on 136, 4 on 156 or 4 on 110, not the truck patterns you may be used to, and axle and cage designs vary by model. Always search by exact model name and year, since a trim or model-year change can alter mounting points.
Choosing by upgrade type
- Wheels and tires: confirm bolt pattern, offset and tire diameter against fender clearance and the machine's gearing.
- Armor and skid plates: look at material, such as aluminum or UHMW plastic, and whether the plate covers the A-arms, belly or frame.
- Cages, bumpers-bumpers-tire-carriers-winch-mounts-2 and roofs: check tube diameter, wall thickness and mounting method.
- Seats and interior: harness points, seat rails and bolt-in mounting vary by chassis.
- Lighting and whips: confirm the wattage your electrical system can supply.
Protection first
Terrain damage on a UTV tends to fall on the belly pan, A-arms and CV boots, so armor is a sensible first upgrade for rocky or brushy trails. A heavier cage or bumper adds weight high on the chassis, which affects handling, so keep additions in proportion to what the machine was designed for.
Suspension and drivetrain changes
Taller tires, wider stance kits and longer-travel suspension all change axle angles. CV axles have limits on operating angle and plunge, so a wheel or tire change should match the other parts. Larger tires also raise load on the clutch and belt. Where a part affects steering, brakes or suspension, have it installed by someone who knows your platform and torque bolts to the manufacturer's specifications.
Fitment and local rules
Use the product page to read features, part numbers and the listed vehicle fitment, then verify against the manufacturer's information. Rules for lighting, flags, spark arresters and street use differ by state and by the land you ride on, so check local regulations before you install and ride. Keep a record of part numbers and torque values for any changes, which makes later service and troubleshooting much easier, and recheck fasteners after the first few rides because new hardware can settle.
Maintenance and inspection
Side-by-sides take a beating from mud, dust and water, so inspect new parts as part of regular service. Check fasteners on skid plates, cages and bumpers-bumpers-tire-carriers-winch-mounts-2 after the first rides and again after rough trips, since vibration loosens bolts. Look at plastic and aluminum armor for cracks, and wash packed mud from around suspension arms and axle boots. Keep an eye on harnesses and light wiring, which can chafe on sharp edges. If you add accessories that draw power, such as lights or a stereo, confirm the machine's charging system can supply them, and fuse each circuit. Keep records of the accessories you add, because they affect weight, handling and the way the machine should be serviced.
Weight is worth thinking about before you stack accessories. Heavy roofs, bumpers-bumpers-tire-carriers-winch-mounts-2, winches and cargo racks raise the center of gravity and add load to springs and shocks, so spring rate and shock valving may need review if you carry a lot of gear.
Popular UTV Parts & Accessories brands
- Pro Armor (51)
- Assault Industries (48)
- Method Race Wheels (33)
- Axia Alloys (29)
- PRP Seats (19)
- PCI Race Radios (17)
- Energy Suspension (14)
- High Lifter Products (14)
- Gorilla Whips (14)
- Buggy Whip (12)
- FUEL Off-Road (11)
- Super Swamper Tires (9)
Shop UTV Parts & Accessories by type
- UTV Tires & Wheels (94)
- UTV Cages, Bumpers & Armor (56)
- UTV Exterior Accessories (54)
- UTV Suspension & Axles (49)
- UTV Interior Accessories (39)
- UTV Lighting & Whips (44)
- UTV Helmets & Communication (21)
- UTV Performance (19)
- UTV Seats & Harnesses (13)
- UTV Audio & Speakers (8)
- UTV/ATV Winches & Towing (2)
UTV Parts & Accessories FAQ
Are UTV parts interchangeable between brands?
Usually not. Chassis dimensions, bolt patterns, suspension mounts and axle designs differ between makers and often between model years. Look for parts listed for your exact make, model and year, and check the manufacturer's specifications.
What is the most useful first UTV upgrade?
It depends on how you ride. For rocky or wooded trails, skid plates and A-arm guards protect the parts most likely to be damaged. For general trail use, many owners start with tires or seats. Match upgrades to the terrain.
Do bigger tires hurt a UTV?
They can. Larger or heavier tires raise load on the drivetrain, effectively change gearing, and can stress the belt and CV axles. Stay near the size recommended for your model and check fender clearance at full suspension travel.











