Select your vehicle

Rigid Industries A-Series Dome Light Mount – 46522

Rigid Industries

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rigid Industries A-Series dome light mount, part number 46522
  • Powder coated aluminum housing, IP68 rated, 9-36 V DC light
  • Holds one A-Series light with up to 400 raw lumens
  • Lights sold separately

Description

Overview

The Rigid Industries A-Series Dome Light Mount (part number 46522) holds one Rigid A-Series light on a Polaris RZR XP 1000. It fits the 2014-2016 Polaris RZR XP 1000 in its EPS versions. The brackets bolt into place with the included hardware.

Each mount secures one A-Series light and gives it a flat mounting surface. The A-Series light provides up to 400 raw lumens from one light and is available with cool white or amber LEDs.

The brackets have a UV and abrasion resistant polyester based powder coat that protects them from wear. They are used with the hardware included in the kit.

Key features

  • Flat mounting surface for the light
  • Powder coated aluminum housing on the light
  • IP68 compliant
  • Available with cool white or amber LEDs
  • UV and abrasion resistant powder coat on the mount
  • Bolts into place with the included hardware

Bracket maintenance

A powder coated bracket holds up well, but grit and road spray can wear through the finish at contact points over time. Wipe the bracket and the light housing with a mild cleaner after muddy runs, and rinse away sand before it works into the bolt holes. Keeping the surface clean helps the light seat flat and keeps the bolts from binding.

Check the bolts at the start of each season and after rough trails. Look for loose fasteners, chipped coating and any sign that the light has shifted in the bracket. Small chips can be touched up before rust starts, and worn hardware is best replaced as a set so the mounting stays even.

  • Wipe the bracket after muddy runs
  • Rinse sand out of the bolt holes
  • Check bolts at the start of each season
  • Touch up small chips before rust starts

Specifications

Brand Rigid Industries
Part number 46522
Light supported One A-Series light
Light output Up to 400 raw lumens per light
Light colors Cool white or amber LEDs
Spread 65-inch horizontal by 69-inch vertical
Input voltage 9-36 V DC
Ingress rating IP68 compliant
Light housing Powder coated aluminum
Mounting surface Flat

Vehicle fitment

It is a direct fit for the 2014-2016 Polaris RZR XP 1000. Other Polaris models and years are not covered, so confirm your RZR’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The mount bolts into place with the hardware included. Wire the light through fused wiring, since it runs on 9-36 V DC.

What’s included

One dome light mount, part number 46522, with the included bolt-in hardware.

Not included: the A-Series light. The lights are sold separately.

Fitment

VehicleYearsTrims
Polaris RZR XP 10002014–2016EPS Base, EPS Desert Edition Base, EPS Fox Edition Base, EPS High Lifter Edition Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this dome light mount fit a 2015 RZR XP 1000?

Yes. The mount fits the 2014-2016 Polaris RZR XP 1000, which includes 2015. Other Polaris models and years are not covered.

How many lights does each mount hold?

Each mount secures one Rigid A-Series light. The light is sold separately, and the mount is a bolt-in bracket with a powder coated finish.

What voltage does the A-Series light need?

The A-Series light runs on 9-36 V DC and is IP68 rated. It provides up to 400 raw lumens from one light, with cool white or amber LED options.

How do I keep a powder coated bracket in good condition?

Clean it with mild soap and water, rinse grit away and dry it. Touch up chips promptly, since bare metal under a chip can start to corrode.

Should dome light bolts be retightened?

Yes, check them after the first few trail runs and periodically afterward. Loose bolts let the light shift, so tighten them to the snug level without forcing the threads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon