Overview
The Rough Country 3-inch Can-Am lift kit (part number R/C97035) is a durable all-aluminum lift for the Can-Am Defender. It gives a full 3 inches of lift from front to rear, raising ride height and giving the UTV a more aggressive appearance.
The kit is built for taller tires, with clearance for tires up to 28 inches. Its aluminum parts are designed for a long service life and to withstand the elements.
Key features
- Full 3 inches of lift from front to rear
- All-aluminum construction for durability
- Increased ground clearance and ride height
- Clearance for tires up to 28 inches
Tire and clearance planning
Tire size is the main decision once a UTV is lifted. Taller tires change gearing and load on the drive system, and they need room at full steering and full suspension travel. Plan the tire choice before buying the lift, and confirm wheel offset and fender clearance match.
Aluminum parts are light and resist corrosion, but rocks can still scratch or bend them. Inspect the lift parts after rough trail use and tighten the hardware on a set schedule. Keep a spring compressor on hand for any future strut work, since the tool is needed each time the struts come off.
- Check tire clearance at full steering
- Inspect aluminum parts for bends
- Recheck hardware after rough trail use
- Confirm alignment after the lift
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C97035 |
| Lift height | 3 inches, front to rear |
| Material | Aluminum |
| Maximum tire size | 28 inches |
| Required tool | Spring compressor |
Vehicle fitment
It fits Can-Am Defender models from 2016 to 2026, Defender MAX models from 2017 to 2026, and Defender PRO HD10 models from 2020 to 2026.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strut disassembly requires a spring compressor, so have one on hand. Lifting the suspension changes alignment, so have the alignment checked after the kit is installed.
What’s included
The lift kit with all included parts.
Not included: a spring compressor.










