Select your vehicle

Rigid Industries Headlight Mount – 46554

Rigid Industries

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rigid Industries headlight mount kit, part number 46554
  • Holds four Rigid D-Series lights, two per side, on the 2014-2016 Polaris RZR XP 1000
  • Two plug-and-play wire harness adaptors and all mounting hardware
  • Stainless steel mounts with a powder coat that matches Rigid lights
  • Professional installation recommended; lights sold separately

Description

Overview

The Rigid Industries Headlight Mount kit (part number 46554) holds four Rigid D-Series lights on the 2014-2016 Polaris RZR XP 1000, with two lights on each side. It is a direct fit for that model. Two custom wire harness adaptors are plug and play, so the wiring connects directly.

The stainless steel mounts are coated with the same UV and abrasion resistant polyester based powder coat used on Rigid lights, so the finish matches the lights. The D-Series lights themselves are sold separately from the kit.

The kit can run one set of lights on low all the time as primary headlights, or run all four on high when more light is needed. The mounts carry a Limited Lifetime Warranty.

Key features

  • Stainless steel mounts for the RZR XP 1000
  • Powder coat finish that matches Rigid D-Series lights
  • Two custom wire harness adaptors for plug-and-play installation
  • Holds four D-Series lights, two on each side
  • Lets one set run on low as primary headlights, or all four on high
  • All necessary mounting hardware included

Headlight wiring and aiming

Running lights as headlights puts more demand on the vehicle’s electrical system, so check the charging output and the fuses before relying on a full set. Using the plug-and-play adaptors keeps the connections simple, but the harness still needs a secure route away from heat and moving parts. Check that each connector is seated fully and that the wiring is protected at every pass-through.

Aim the headlights on level ground and recheck the aim after rough trails. Because all four lights share the mounts, a loose bracket can throw the whole beam off. Inspect the powder coat at the contact points and touch up chips before they expose bare metal.

  • Check charging output before running a full set
  • Seat each connector fully
  • Protect wiring at every pass-through
  • Recheck aim after rough trails

Specifications

Brand Rigid Industries
Part number 46554
Fits 2014-2016 Polaris RZR XP 1000
Lights supported Four Rigid D-Series, two per side
Mount material Stainless steel
Finish UV and abrasion resistant polyester based powder coat
Wiring Two custom wire harness adaptors, plug and play
Hardware All necessary mounting hardware included
Warranty Limited Lifetime

Vehicle fitment

It is a direct fit for the 2014-2016 Polaris RZR XP 1000. Other RZR models and model years are not covered, so confirm your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Rigid recommends professional installation for this kit. The wire harness adaptors are plug and play. Confirm local rules for auxiliary lights on public roads before using the lights as headlights.

What’s included

The headlight mount kit with stainless steel mounts, two custom wire harness adaptors and all necessary mounting hardware.

Not included: the four Rigid D-Series lights, which are sold separately.

Fitment

VehicleYearsTrims
Polaris RZR XP 10002014–2016EPS Base, EPS Desert Edition Base, EPS Fox Edition Base, EPS High Lifter Edition Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

How many lights does the headlight mount kit hold?

Four Rigid D-Series lights, two on each side. Rigid says one set can run on low all the time as primary headlights, or all four can run on high when needed.

Does the headlight mount kit fit a 2015 RZR XP 1000?

Yes. The kit fits the 2014 to 2016 Polaris RZR XP 1000, which covers the 2015 model year. Other RZR models are not covered.

Is professional installation recommended for this kit?

Yes. Rigid recommends professional installation. The kit includes all mounting hardware and two plug-and-play wire harness adaptors, which keep the wiring simple.

Can D-Series lights be used as headlights on any RZR?

Fit depends on the model, year and mounting points of the vehicle. This kit is designed for the 2014-2016 Polaris RZR XP 1000, so confirm fit for your year and model before ordering.

How do I know the headlight wiring is working correctly?

Check that each light switches on in the mode you chose and that the output looks even. If a light flickers or dims, inspect the connector and fuse before running the setup again.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon