Select your vehicle

Rigid Industries B-Pillar Light Mount – 46533

Rigid Industries

$48.56In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 11:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rigid Industries B-Pillar light mount, part number 46533
  • Stainless steel bracket for D-Series lights, fits the 2014-2016 Polaris RZR XP 1000
  • Up to 3096 raw lumens for back-up or area lighting
  • Lights sold separately

Description

Overview

The Rigid Industries B-Pillar Light Mount, part number 46533, secures a Rigid D-Series light to the factory cage of a Polaris RZR XP 1000. It is a direct fit for the 2014-2016 Polaris RZR XP 1000. The brackets have a UV and abrasion resistant polyester based powder coat that is designed to hold up for years in harsh conditions.

The mount suits back-up lights or area lighting. Each D-Series light it holds can provide up to 3096 raw lumens, and the setup suits off-road use.

The mount is stainless steel with a black powder coat finish. All necessary hardware is included, and the mount carries Rigid’s limited lifetime warranty.

Key features

  • Stainless steel construction
  • Black powder coat finish with UV and abrasion resistance
  • Holds any Rigid D-Series light
  • Mounts to the factory cage
  • Up to 3096 raw lumens from the lights mounted
  • Includes all necessary hardware

Setting up back-up lights

A pillar-mounted light sits at the rear of the cab where it can light the area behind the vehicle or the space beside it. Before mounting, check the angle the light will face, and make sure the bracket clears seat belts, grab handles and any roof panel. Pick a light position that gives a clear view of the work area without shining into the driver’s eyes.

Wiring a light on a side-by-side is simple, but the connections need to stay dry and protected from vibration. Use a fused circuit sized for the lights, route the cable along the existing frame, and secure it with ties so it cannot rub. After rough trail runs, check that the bracket and light have stayed tight, because repeated bumps can loosen fasteners.

  • Check bracket clearance around seat belts and grab handles
  • Use a fused circuit sized for the lights
  • Route cable away from moving parts
  • Re-check bolts after the first trail runs

Specifications

Brand Rigid Industries
Part number 46533
Light supported Any Rigid D-Series light
Light output supported Up to 3096 raw lumens
Material Stainless steel
Finish Black powder coat
Mounting Factory cage
Warranty Limited lifetime

Vehicle fitment

Its fit covers the 2014-2016 Polaris RZR XP 1000 only. Confirm fit for your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The mount bolts to the factory cage with the hardware included, so no drilling is described.

What’s included

One B-Pillar light mount, part number 46533, with all necessary hardware.

Not included: the D-Series lights.

Fitment

VehicleYearsTrims
Polaris RZR XP 10002014–2016EPS Base, EPS Desert Edition Base, EPS Fox Edition Base, EPS High Lifter Edition Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which lights does the B-Pillar mount take?

The mount holds any Rigid D-Series light. The lights are not included with the mount, and Rigid says they are sold separately.

Does the B-Pillar mount fit the 2015 Polaris RZR XP 1000?

Yes. The mount is a direct fit for the 2014-2016 Polaris RZR XP 1000, which includes 2015. Confirm your vehicle's year, model and trim before ordering, since other RZR models are outside this fit.

How much light can the mount support?

The B-Pillar mount, with D-Series lights, can provide up to 3096 raw lumens for back-up or area lighting. The brackets have a UV and abrasion resistant powder coat.

Can the mount be used with other Rigid lights?

The mount is made for D-Series lights. Confirm the light model before ordering, and check that the hardware fits your setup before installing.

How do I keep the light from vibrating loose?

Tighten all bolts to the torque given in the installation instructions, and re-check them after the first few trail runs. Use thread locker on bolts that work loose, and secure the wiring with ties so it does not pull on the connections.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon