Transmission Parts
Showing 13–24 of 278 resultsSorted by popularity
-
CJ T170 Series Transmissions
Crown Automotive T15 2nd and 3rd Gear Synchronizer Assembly – J0991014
- Replacement 2nd and 3rd gear synchronizer assembly for the T15 transmission
- Part number CROJ0991014 from Crown Automotive
- Fits 1971–1975 Jeep J-series trucks, 1974–1975 Cherokee SJ and 1971–1975 Wagoneer SJ
SKU: CROJ0991014 -
-
-
CJ T170 Series Transmissions
Crown Automotive SR4 Manual Trans Input Bearing Retainer Gasket – J8127392
CJ T170 Series TransmissionsCrown Automotive SR4 Manual Trans Input Bearing Retainer Gasket – J8127392
- Crown Automotive gasket for the SR4 manual transmission input bearing retainer
- Position: front, part number J8127392
- Fitment covers 1980–1983 Jeep CJ5 and CJ7
- Also covers 1981–1983 Jeep Scrambler
SKU: CROJ8127392 -
-
CJ T170 Series Transmissions
Crown Automotive Rear Cluster Shaft Bearing – 83506080
- Crown Automotive rear cluster shaft bearing, part number 83506080
- Made for AX15 transmissions
- Roller-style bearing supplied with its snap ring
- Fitment covers Cherokee XJ, Grand Cherokee ZJ, Wrangler TJ and Wrangler YJ
SKU: CRO83506080 -
-
CJ T170 Series Transmissions
Crown Automotive NV3550 1st/2nd Gear Shift Fork – 4886077AB
- Crown Automotive 1st/2nd gear shift fork, part number 4886077AB
- Made for the NV3550 transmission
- Fitment covers 1997–2004 Dodge Ram trucks and 2002–2004 Jeep Liberty (KJ) and Wrangler (TJ)
- Jeep trims covered: Renegade, Sport, Rubicon, SE, Sahara and X
SKU: CRO4886077AB -
Shift Mode Synchronizer Assembly
Crown Automotive NP231 Shift Mode Synchronizer – 4796967
- Pre-assembled shift mode synchronizer for the NP231 transfer case
- Includes center hub, outer sliding hub, spring clips and synchronizer plates
- Factory style replacement
- Fits 1987–1995 Cherokee XJ and Wrangler YJ
- Part number 4796967
SKU: CRO4796967 -
CJ T170 Series Transmissions
Crown Automotive Manual Trans Shift Rail Cap – J0642757
- Crown Automotive manual transmission shift rail cap, part number J0642757
- Fits the rear position on the transmission
- Fitment covers 12 vehicle entries from 1946 to 1971
- Covers CJ3, CJ5, CJ6, Commando, FC, Utility Wagon and Willys models
SKU: CROJ0642757 -
CJ T170 Series Transmissions
Crown Automotive Front Maindrive Gear Bearing – J8136643
- Fits 1976–1979 Jeep CJ5 and CJ7 models (Base, Golden Eagle and Renegade trims)
- For T86, T-90 and T-150 3-speed transmissions
- Front maindrive gear bearing, part number J8136643
- Direct fit replacement part from Crown Automotive
SKU: CROJ8136643 -
What you can find here
This category spans the hardware around a transmission as well as the parts inside it. External items include transmission mounts, crossmembers, drop brackets and torque arm bushings. Service items include gaskets, pans, shift cover seals, shift knobs and boots. Internal parts for manual gearboxes such as the AX15 and T14 include gears, synchronizer hubs and blocking rings, and adapters let a transmission connect to a transfer case or different engine.
Mounts, crossmembers and lift-related parts
A worn mount lets the transmission move and can cause clunks, vibration and driveline strain. After a lift, drivetrain angles change, and drop brackets or a modified crossmember lower the transmission to restore transfer case and driveshaft angles. Polyurethane mounts such as Prothane parts resist wear but are firmer than rubber, which can raise noise and vibration.
Deep pans and fluid
A deep-sump pan holds more fluid and adds cooling capacity, which can help when towing, running large tires or climbing at low speeds. Listings name specific automatics, such as the 42RE, 68RFE, 727, 4L60E and E40D/4R100, so match the transmission model exactly. Change fluid with the type specified by the manufacturer, since mixing or using the wrong fluid can damage clutches, and replace the filter and gasket with a pan swap.
- Identify the transmission model from the tag or pan shape.
- Check whether a pan requires a different filter or longer bolts.
- Fill to the specified level using the correct procedure and temperature.
Adapters and manual parts
Adapters connect transmissions to transfer cases or engines that were not originally paired, and need to be matched by model and spline specifications. For internal manual parts, a rebuild requires precision and special tools, and many owners rely on a transmission shop.
Support the transmission with a jack before removing any mount or crossmember, torque fasteners to specification, and confirm fitment for your exact year, make, model and transmission before ordering.
Keep a record of which transmission model and fluid you have, since the information helps when ordering any future parts. After servicing, check for leaks at the pan gasket and the mounts, and monitor the temperature if you tow.
Materials, construction and common pairings
Transmission pans are stamped steel or cast aluminum, and deep-sump versions often include fins to help cool fluid and a drain plug for easier service. Gaskets may be cork, rubber or composite, and the right type depends on the pan and the transmission maker. Mounts combine steel brackets with rubber or polyurethane, and crossmembers are steel tube or plate. Gears and synchronizers are heat-treated steel with brass or composite synchro rings that wear gradually.
Typical pairings include a pan with a filter and gasket, a mount with new crossmember bolts, a shift boot with a new shift knob, and an adapter with a matching transfer case and driveshaft. If you change the transmission mount height, check the driveshaft angles too.
Confirming fitment
The most reliable method is to identify the transmission by its tag or casting numbers and match it to the part listing. Count the pan bolts, compare pan shape, and measure the mount bolt spacing. Adapters depend on bellhousing patterns and spline counts, so these must be verified for your exact engine and transfer case.
Popular Transmission Parts brands
- Crown Automotive (136)
- Omix-Ada (60)
- Jeep (19)
- Drake (11)
- Pro Comp Suspension (10)
- Mag-Hytec (8)
- B&M (6)
- Rugged Ridge (6)
- Energy Suspension (6)
- Daystar (5)
- Prothane Motion Control (4)
- Advance Adapters (4)
Shop Transmission Parts by type
- Transmission Mount (27)
- CJ T170 Series Transmissions (11)
- Transmission Drop Bracket (7)
- Transmission Crossmember (4)
- Transmission Adapters (4)
- CJ T4 Transmission (4)
- Transmission Torque Arm Bushing (2)
- CJ T5 Transmission (1)
- Liberty NV-3550 Transmission (1)
- Transmission Parts - Automatic (17)
- Manual Transmission Parts (198)
Transmission Parts FAQ
What does a deep transmission pan do?
It holds extra fluid and has more surface area, which helps keep temperatures down in towing or heavy off-road use. It must match your transmission model and may need a specific filter.
How do I know my transmission mount is worn?
Common signs are clunking when shifting between drive and reverse, vibration, and visible cracks or separation in the rubber. The transmission may also sit lower or at an angle.
Why would I need a transmission drop bracket?
After a lift, the angle between transmission and transfer case or driveshaft may become steep. A drop bracket or crossmember lowers the transmission and helps restore proper angles.
Can I use any fluid in my automatic?
No. Different transmissions need specific fluids, and the wrong type can damage clutches and seals. Use the type listed in the owner's manual or the manufacturer's specifications.










