Overview
The Crown Automotive AX4, AX5 input shaft, part number 83506020, is a replacement input shaft for AX4 and AX5 manual transmissions. It covers 1988–2000 Jeep Cherokee (XJ), 1988–1992 Jeep Comanche, 1997–2002 Jeep Wrangler (TJ) and 1988–1995 Jeep Wrangler (YJ) models.
The input shaft carries engine torque from the clutch into the gear train, so worn splines or bearing surfaces can cause noise or poor engagement.
Key features
- Replacement input shaft for AX4 and AX5 manual transmissions
- Crown Automotive part number 83506020
- Covers Cherokee XJ, Comanche, Wrangler TJ and Wrangler YJ
- Sold as a direct fit replacement
Input shaft wear and clutch link
The input shaft is the link between the clutch disc and the gear train, so its splines take the torque of every launch and every gear change. Spline wear often shows up as a clunk when the clutch is released, or as a rattle at idle that fades under load. Because the shaft also rides on a pilot bearing, play at the front of the transmission can point to either part.
When replacing an input shaft, look at the clutch disc splines and the pilot bearing at the same time. A worn disc can wear a new shaft quickly, and a tired pilot bearing can let the new shaft sit off-center. Compare the new shaft with the old one carefully before reassembly, since subtle differences in spline fit can cause hard engagement.
- Check the clutch disc splines for wear
- Inspect the pilot bearing for play
- Compare spline fit before reassembly
- Look for scoring on the bearing surface
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83506020 |
| Transmission | AX4, AX5 |
| Part type | Input shaft |
| Fitment type | Direct Fit |
Vehicle fitment
Crown Automotive lists 1988–2000 Jeep Cherokee (XJ) Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport; 1988–1992 Jeep Comanche Base, Chief, Eliminator, Laredo and Pioneer; 1997–2002 Jeep Wrangler (TJ) SE, Sahara, Sport and X; and 1988–1995 Jeep Wrangler (YJ) Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport.
Not on the list: Liberty KJ, Wrangler (TJ) 2003–2006 and Wrangler (JK). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Input shaft replacement means removing the transmission from the vehicle and separating the clutch and gear train, so an experienced transmission technician should handle the work.
What’s included
One input shaft is included.










