Overview
The Omix-ADA T18 front retainer, part number 18890.21, is a front bearing retainer for the T18 manual transmission. Omix-ADA makes direct replacement Jeep parts that it says are built to the original specifications.
A retainer holds the front bearing in its bore inside the transmission case. Because the part is position-specific, confirm it is the front retainer before ordering.
Key features
- Front position retainer for the T18 transmission
- Built to original specifications
- Direct replacement for Jeep applications
- Covered by a limited five year warranty.
Retainer position and bearing care
A front bearing retainer holds the bearing in place inside the case and sets its preload. If the retainer loosens or the bearing bore is worn, the input shaft can shift slightly, which shows up as gear noise, grinding during shifts, or lubricant seepage at the front of the case. Checking the retainer and bearing whenever the front of the transmission is opened helps prevent a repeat failure.
Before installing a new retainer, clean the bore and the mating surface thoroughly. Make sure the retainer is seated square and that any fasteners are tightened in an even pattern. Because the retainer is position-specific, label it when removed so it is not confused with the rear or other retainers.
- Confirm the T18 transmission before ordering
- Clean the bore and sealing surface
- Inspect the bearing for roughness or play
- Label the removed retainer to keep positions clear
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18890.21 |
| UPC | 804314043131 |
| Transmission | T18 |
| Position | Front |
| Warranty | Limited five year warranty. |
Vehicle fitment
Only the T18 transmission is named, without model years or vehicle names. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Retainer replacement generally means opening the transmission, so confirm your unit is a T18 and the part is the front retainer before disassembly.
What’s included
Check the package contents against your installation before starting. Seals, gaskets and bolts should be confirmed before disassembly.









