Overview
The Omix-Ada 18887.75 is a shift fork roller for the AX15 manual transmission, used at the third to fourth shift fork. Omix-Ada builds it as a direct replacement to original specifications, and the manufacturer fitment list names 1984–2000 Jeep Cherokee (XJ), 1987–1995 Jeep Wrangler (YJ) and 1997–1999 Jeep Wrangler (TJ) models.
Key features
- Direct replacement roller for the third to fourth shift fork
- Built to original specifications by Omix-Ada
- Fitment list covers XJ Cherokee, YJ Wrangler and TJ Wrangler
- Carries a limited five year manufacturer warranty
Signs the roller is worn
The roller rides at the third to fourth shift fork and bears the load as the fork moves the sleeve. Wear on the roller can show up as a notchy feel when shifting between those gears, a clicking sound, or a gear that seems to stop short of full engagement. Because the roller is inside the transmission, these symptoms are often confirmed only after the case is opened.
Roller wear often comes with wear on the fork and shift rail it runs against. Inspect the contact surfaces and the rail bore before fitting a new roller, and make sure the roller turns freely. Check that the transmission is an AX15 and confirm the shift fork position before buying, so the part matches the gear position you need to repair.
- Look for flat spots on the roller
- Check the fork for matching wear
- Inspect the rail bore for scoring
- Confirm the roller turns smoothly before installing
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18887.75 |
| UPC | 804314060343 |
| Transmission | AX15 manual |
| Application | Third to fourth shift fork |
Vehicle fitment
The manufacturer fitment list covers 1984–2000 Jeep Cherokee (XJ) Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport; 1997–1999 Jeep Wrangler (TJ) SE, Sahara and Sport; and 1987–1995 Jeep Wrangler (YJ) Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport.
The list does not cover Wrangler TJ years from 2000 to 2006, the Wrangler JK, LJ or JL, or Grand Cherokee and Liberty models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The roller sits inside the transmission, so fitting it means opening the case. A qualified transmission technician should handle the job.
What’s included
One shift fork roller.
Not included: shift forks, shift rails or transmission gaskets.









