Overview
The Omix-Ada 18887.34 is a first gear thrust washer for the AX15 manual transmission. It is paired with the 4.0L 6 cylinder engine.
Thrust washers control end play on the gear they sit against. This one is made for the AX15, and it fits the 1988-1995 Wrangler YJ and the 1997 Wrangler TJ Sport.
Key features
- First gear thrust washer
- Made for AX15 manual transmissions
- Listed with the 4.0L 6 cylinder engine
- Built to original specifications by Omix-Ada
Washer clearance and rebuilds
A first gear thrust washer sets the axial clearance of the gear it sits against. Too little clearance can cause the gear to bind or wear the washer face, while too much lets the gear rock and clatter under load. Symptoms of incorrect clearance include a whine in first gear, a gear that feels loose, or wear marks on the washer and the gear collar.
Because the washer is thin and sits behind a gear, it is usually replaced during a rebuild where the gear and shaft are already out. Measure the end play after assembly and compare it with the service limits for your transmission. Clean the washer faces, lubricate them, and check that the washer sits flat without rotating. If the clearance is off, a washer of a different thickness may be needed, which is a reason to measure before final assembly.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18887.34 |
| UPC | 804314063214 |
| Type | First gear thrust washer |
| Transmission | AX15 |
| Engine | 4.0L 6 cylinder |
Vehicle fitment
It fits the 1997 Wrangler TJ Sport and the Wrangler YJ from 1988 to 1995 (Base, Islander, Laredo, Renegade, Rio Grande, S, SE and Sahara trims).
Confirm fit for your vehicle’s year, model and trim before ordering, especially for other Wrangler TJ trims and years, the Wrangler JK and the Cherokee XJ.
Installation notes
Fitting a first gear thrust washer means opening the transmission, so a shop with manual transmission rebuild experience is the practical choice.
What’s included
The item is one thrust washer. Check the package contents against your installation before starting.









