Select your vehicle

Transmission Parts

Transmission parts for Jeeps and other 4x4s, from mounts, crossmembers and drop brackets to deep-sump pans, adapters, gaskets, gears and shifter parts. Subcategories cover manual and automatic transmissions. Brands include Crown Automotive, Omix-Ada, Mag-Hytec, Pro Comp Suspension and Advance Adapters. Open a product page to compare part numbers and fitment, then compare the products below.

Mag-Hytec finned aluminum deep sump pan for a Ford E40D/4R100

The transmission takes every gear change and every low-range crawl, and off-road use loads it with heat, angle and shock. This section covers the parts around and inside it: mounts, drop brackets, crossmembers, deep pans, transfer case adapters and the small manual gearbox parts that keep a shifter tight.

Parts here split three ways. Manual transmission parts are the largest group: bearings, seals, synchronizer parts, shift boots, bezels and bushings for Jeep gearboxes such as the AX5, AX15, NV3550, T5 and T15. Automatic parts are mostly pans, including deep sump designs. Mounts, drop brackets, crossmembers, torque arm bushings and adapters handle how the transmission sits and what it bolts to. Most listings name one transmission model, so match that first.

248Parts listed
20Brands
7Part types
+7 2/3 qtMost added pan capacity
21 / 23NP231 adapter splines
1.5–3"Poly mount heights listed

Shop transmission parts by type

Popular transmission parts

Transmission parts reference

Figures below come from the listed products. Use them to compare options, then check the product page for your exact application.

Deep sump pans in this section

Added capacityOverall height
Ford E40D / 4R1007 2/3 qt over stock6 1/8"
Dodge 727 extra deep4 qt over stock5 7/8"
GM 4L60E3 1/3 qt over stock4 1/4"
Dodge 68RFE2.5 qt over stock4 5/8"
Ford 6.7L automatic, 2011–20175.5 qt over stock4 1/4"
Allison A100010.5 qt total capacity5 1/2"

Mount materials compared

Stock rubberPolyurethane
Vibration at the cabLowestMore, especially at idle
Drivetrain movementMore, can let the shifter wanderLess, holds the driveline steady
Wear and fluidsSoftens and tears with age and oilResists oil and wear
Best fitDaily driving, factory feelHard trail use, lifted rigs

After a lift, check these

  • Rear driveshaft angle at the transfer case output
  • Vibration at highway speed that was not there before
  • Crossmember and mount condition before adding a drop bracket
  • Clearance between pan, exhaust and crossmember after a drop
  • Shift linkage and transfer case linkage travel
  • Ground clearance lost under the crossmember

Transfer case adapters listed

GM TH400 to Dana 201972–1979 CJ5, CJ6 and CJ7
GM 700R4 (2WD) to Dana 300May need an adapter crossmember kit
GM TH350 to Dana 300 or NP231NP231 with 23 spline input
GM TH350 (4WD) to NP231NP231 with 21 spline input

Common Jeep manual transmissions

  • AX5: Aisin 5-speed, mostly behind 4-cylinder Wrangler and Cherokee engines
  • AX15: Aisin 5-speed, behind the 4.0L six in Wrangler and Cherokee through 1999
  • NV3550: New Venture 5-speed that replaced the AX15 in Wrangler and Cherokee
  • T4 and T5: Borg-Warner 4- and 5-speeds in 1980s CJ models
  • T14 and T15: Borg-Warner 3-speeds in older CJ and full-size Jeeps
  • SR4: Borg-Warner 4-speed in late CJ models

Pan, filter and gasket fitment depends on the exact transmission model and sometimes the filter style. Read the tag or pan shape before ordering, and check clearance with extra deep pans.

All Transmission Parts 278 parts

Showing 1–12 of 278 resultsSorted by popularity

What you can find here

This category spans the hardware around a transmission as well as the parts inside it. External items include transmission mounts, crossmembers, drop brackets and torque arm bushings. Service items include gaskets, pans, shift cover seals, shift knobs and boots. Internal parts for manual gearboxes such as the AX15 and T14 include gears, synchronizer hubs and blocking rings, and adapters let a transmission connect to a transfer case or different engine.

Mounts, crossmembers and lift-related parts

A worn mount lets the transmission move and can cause clunks, vibration and driveline strain. After a lift, drivetrain angles change, and drop brackets or a modified crossmember lower the transmission to restore transfer case and driveshaft angles. Polyurethane mounts such as Prothane parts resist wear but are firmer than rubber, which can raise noise and vibration.

Deep pans and fluid

A deep-sump pan holds more fluid and adds cooling capacity, which can help when towing, running large tires or climbing at low speeds. Listings name specific automatics, such as the 42RE, 68RFE, 727, 4L60E and E40D/4R100, so match the transmission model exactly. Change fluid with the type specified by the manufacturer, since mixing or using the wrong fluid can damage clutches, and replace the filter and gasket with a pan swap.

  • Identify the transmission model from the tag or pan shape.
  • Check whether a pan requires a different filter or longer bolts.
  • Fill to the specified level using the correct procedure and temperature.

Adapters and manual parts

Adapters connect transmissions to transfer cases or engines that were not originally paired, and need to be matched by model and spline specifications. For internal manual parts, a rebuild requires precision and special tools, and many owners rely on a transmission shop.

Support the transmission with a jack before removing any mount or crossmember, torque fasteners to specification, and confirm fitment for your exact year, make, model and transmission before ordering.

Keep a record of which transmission model and fluid you have, since the information helps when ordering any future parts. After servicing, check for leaks at the pan gasket and the mounts, and monitor the temperature if you tow.

Materials, construction and common pairings

Transmission pans are stamped steel or cast aluminum, and deep-sump versions often include fins to help cool fluid and a drain plug for easier service. Gaskets may be cork, rubber or composite, and the right type depends on the pan and the transmission maker. Mounts combine steel brackets with rubber or polyurethane, and crossmembers are steel tube or plate. Gears and synchronizers are heat-treated steel with brass or composite synchro rings that wear gradually.

Typical pairings include a pan with a filter and gasket, a mount with new crossmember bolts, a shift boot with a new shift knob, and an adapter with a matching transfer case and driveshaft. If you change the transmission mount height, check the driveshaft angles too.

Confirming fitment

The most reliable method is to identify the transmission by its tag or casting numbers and match it to the part listing. Count the pan bolts, compare pan shape, and measure the mount bolt spacing. Adapters depend on bellhousing patterns and spline counts, so these must be verified for your exact engine and transfer case.

Popular Transmission Parts brands

Transmission Parts FAQ

What does a deep transmission pan do?

It holds extra fluid and has more surface area, which helps keep temperatures down in towing or heavy off-road use. It must match your transmission model and may need a specific filter.

How do I know my transmission mount is worn?

Common signs are clunking when shifting between drive and reverse, vibration, and visible cracks or separation in the rubber. The transmission may also sit lower or at an angle.

Why would I need a transmission drop bracket?

After a lift, the angle between transmission and transfer case or driveshaft may become steep. A drop bracket or crossmember lowers the transmission and helps restore proper angles.

Can I use any fluid in my automatic?

No. Different transmissions need specific fluids, and the wrong type can damage clutches and seals. Use the type listed in the owner's manual or the manufacturer's specifications.