Overview
The Trail Gear 105034-3-KIT is a transfer case shifter seat for 1986–1995 Suzuki Samurai models.
A worn shifter seat is a likely cause when a transfer case sticks between gears or the shifter will not move. Replacing the seat addresses that wear.
Key features
- Replacement for a worn transfer case shifter seat
- Installation takes just a few minutes.
- Fits 1986–1995 Suzuki Samurai models
- Trail Gear part number 105034-3-KIT
Signs of a worn shifter seat
The shifter seat is the pivot point where the transfer case shift lever moves. When it wears, the lever can feel loose, slop between gears, or resist movement. A transfer case that sticks between gears often feels like the shifter is binding rather than the gears failing, so check the seat before pulling the transfer case apart.
Before replacing the seat, inspect the shift rod, bushings and linkage for wear or bends. Clean the shifter area and make sure the lever moves freely by hand after reassembly. Test each range on level ground before relying on the vehicle off road.
- Check the shift lever for play before removal
- Inspect linkage bushings at the same time
- Test each gear range after installation
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 105034-3-KIT |
| UPC | 70000621568 |
| Part type | Transfer case shifter seat |
Vehicle fitment
It fits the 1986–1995 Suzuki Samurai in Base, JA, JL, JX and JX SE trims.
Other Suzuki models and years are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes just a few minutes. Gather basic hand tools and review the shifter linkage before starting.
What’s included
Check the kit contents against your installation before starting.









