Overview
The Trail Gear 107510-1-KIT is a twin stick shift boot kit designed to work with Trail Gear custom shifters. The boots help keep dangerous gases out of the passenger compartment and give a finished-looking installation.
It is a universal fit kit, and no vehicle, model year or chassis code is named. Confirm that your shifter setup matches the kit before installing.
Key features
- Twin stick shift boot kit
- Designed for Trail Gear custom shifters
- It is a universal fit kit.
- Stated purpose: keeping dangerous gases out of the passenger compartment
Sealing the cabin around the shifter
On a shifter that passes through the floor, the boot is the barrier between the cabin and the shift area. Fumes, dust and water can travel up the shifter opening if the seal is poor, so a snug, flexible boot matters more than its appearance. Custom shifters often have different base shapes from factory levers, which makes the boot fit a key check.
Before fitting twin boots, confirm the shifter tubes are square to the floor and that both levers clear each other through full travel. Tight clearances can cause the boots to rub and crack. Clean the floor surface before installing so the seal sits flat.
Boots age with heat and sun exposure. Inspect them periodically for cracks, stiffness or gaps at the lip, and replace them when they no longer seal. A quick check during oil changes or other underbody work is an easy habit.
- Check lever clearance through full travel
- Inspect the lip for gaps after installation
- Keep the floor seal clean and dry
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 107510-1-KIT |
| UPC | 70000621760 |
| Kit type | Twin stick shift boot kit |
| Shifter compatibility | Trail Gear custom shifters |
Vehicle fitment
The kit is universal fit, so it is not tied to a specific vehicle. Check your shifter setup and transmission layout before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a twin stick shift boot kit.









