Cargo Management
Showing 25–36 of 79 resultsSorted by popularity
-
-
Tie Down
Curt Manufacturing 15′ Cambuckle Cargo Straps, 2 Pack (Dark Green) – 83015
- Curt Manufacturing CRT83015 cambuckle cargo strap, 15′ long, dark green
- Universal Fit: not built for a specific make, model or year
- Work load limit 300 lbs.; break strength 900 lbs.
- Woven nylon webbing with rubber-coated S-hooks
- Two straps included
SKU: CRT83015 -
Universal Tool Storage Boxes
Better Built 38″ V-Shape Wide Utility Trailer Tongue Box (Gloss Black) – 66212321
Universal Tool Storage BoxesBetter Built 38″ V-Shape Wide Utility Trailer Tongue Box (Gloss Black) – 66212321
- 38-inch V-shape wide trailer tongue box in gloss black
- Paddle handle and self-rising gas spring for single-handed entry
- Full seal weather stripping and a self-adjusting striker
- Part number B/B66212321, with a 1 year limited warranty
SKU: B/B66212321 -
Universal Tool Storage Boxes
Warrior Mod Box 18 Inch – 4381
- Warrior 18-inch MOD Box for 2005 to 2017 Toyota Tacoma
- Mounts to factory bed channels with included hardware, no drilling or cutting
- Stores gear inside the box or hung outside with standard MOLLE patterning
- Lockable with any padlock or cable lock; sold individually
SKU: W/I4381 -
-
-
Universal Tool Storage Boxes
Tuffy Rear Underseat Lockbox – 309-01
- Tuffy Rear Underseat Lockbox, part number 309-01, for Ford F-250 and F-350 Super Duty
- Black 16 gauge welded steel with over 2170 cubic inches of lockable storage
- Pry-Guard lock with 10 tumbler double bitted key and weather seals
- Mounts under the rear seat with factory hardware, no drilling
- Requires removal of factory under-seat trays or boxes; 4-door models
SKU: TFY309-01 -
Universal Tool Storage Boxes
Tuffy Rear Underseat Lockbox – 307-01
- Tuffy Rear Underseat Lockbox, part number 307-01
- Black 16 gauge welded steel lockbox with over 3500 cubic inches of storage
- Pry-Guard lock with 10 tumbler double bitted key and weather seals
- Mounts under the rear seat with factory hardware, no drilling
- Confirm fit for your year, model and trim before ordering
SKU: TFY307-01 -
Universal Tool Storage Boxes
Tuffy Conceal Carry Valuables Tote – 289-101-01
- Tuffy Conceal Carry Valuables Tote, part number 289-101-01
- Exterior 9 in L x 10 in W x 3 in H; interior 6-3/16 in L x 9-1/2 in W x 2 in H
- Welded steel box with Pry-Guard lock and 10 tumbler double bitted key
- Universal fit; mounting sleeve bolts to a vehicle or sturdy surface
- Optional pushbutton combo lock and pick-n-pluck foam
SKU: TFY289-101-01 -
Universal Tool Storage Boxes
Tuffy Conceal Carry Valuable Tote with Pushbutton Combination Lock – 289-089-01
Universal Tool Storage BoxesTuffy Conceal Carry Valuable Tote with Pushbutton Combination Lock – 289-089-01
- Tuffy Conceal Carry Valuable Tote, part number 289-089-01
- Welded steel lockable box that slides into a bolt-on mounting sleeve
- Pry-Guard locking system with a 10 tumbler double bitted key
- Grade 8 mounting hardware; universal fit, not vehicle-specific
- Carpet-lined interior; optional pushbutton combo lock and pick-n-pluck foam
SKU: TFY289-089-01 -
Universal Tool Storage Boxes
Tuffy Rear Underseat Lockbox with Subwoofer – 287-01
- Tuffy 287-01 rear underseat lockbox for F-150 Crew Cab with subwoofer
- Over 2740 cubic inches of lockable storage in 16 gauge welded steel
- Dual locks and a 10 tumbler double bitted Pry-Guard lock
- Lists 2009 to 2017 Ford F-150 trims, including Raptor
SKU: TFY287-01 -
Universal Tool Storage Boxes
Tuffy Rear Underseat Lockbox with out Subwoofer – 283-01
- Fits the 2009 to 2017 Ford F-150 per the manufacturer fitment list, Crew Cab without subwoofer
- Tuffy part number 283-01, UPC 70000597236
- Welded 16 gauge steel with over 4000 cubic inches of lockable storage
- Pin-Lock hinge and Pry-Guard locking system with a 10 tumbler double bitted lock
- Mounts under the rear seat with factory hardware, no drilling required
SKU: TFY283-01
Securing a load
Loose cargo shifts under braking and cornering and can become a hazard to everyone in the vehicle. Tie-downs, nets and organizers keep items in place. Pick gear by what you carry: heavy equipment needs ratcheting or cam straps, light loads fit a net, and small tools do better in a box or organizer.
Tie-downs and straps
- Cambuckle straps tighten by hand and suit light to medium loads. Overtightening can crush delicate items.
- Ratchet straps use a mechanical ratchet for heavier loads and tighter tension.
- Locking straps add a lock so cargo is harder to remove.
- Tie-down rings and anchors bolt to the bed or rail and provide anchor points.
Look for the working load limit, not just break strength, and use straps with a combined working load greater than the weight of the cargo. Inspect webbing for fraying, cuts and sun damage, and replace worn straps.
Nets, organizers and boxes
A cargo net holds irregular loads in a bed or on a rack. Bed organizers divide the space so groceries, recovery gear or jugs stay put. Cargo boxes mount on roofs or hitch carriers and add enclosed storage. Compare dimensions, weight capacity and mounting hardware, and check that the box does not block rear sensors or the tailgate.
Hitch-mounted carriers
A hitch carrier slides into a receiver and holds a basket, box or platform. Confirm the receiver size and the hitch's tongue weight rating, because the carrier and its load count toward it. Carriers reduce rear visibility and ground clearance, and they can obscure the license plate or lights, so check local rules.
Fitment and safety
- Check that anchor points, rails or racks match the hardware in your vehicle.
- Do not exceed the vehicle's payload rating or the accessory's stated capacity.
- Place heavy items low and forward, and re-check tension after the first few miles.
- Flag overhanging loads as required where you drive.
Many items are universal-fit, but confirm dimensions and mounting details on the product page.
Inspection and common mistakes
Check your gear before every trip. Straps should be free of cuts, melted spots, chemical stains and frayed stitching. Hooks should not be bent, and ratchets should move freely and lock. Store straps dry and out of sunlight, since UV and moisture weaken webbing over time.
- Do not tie knots in webbing, which reduces its strength.
- Do not hook a strap to a part of the vehicle that is not an anchor point.
- Use edge protectors where a strap crosses a sharp corner.
- Keep fuel cans, propane and sharp items in rated, secured containers away from passengers.
Think about the whole load. Heavy items should sit low and ahead of the rear axle, and loose small items belong in bins or nets. In an SUV, cargo behind the rear seat should be below the seatback or restrained by a barrier, since loose objects can move forward in a sudden stop. Roof boxes should be loaded with lighter items and weighed against the roof's rating, since a high load raises the center of gravity and can affect handling in crosswinds.
Measure the dimensions of what you carry, then compare them to the usable space inside a box or bed organizer before choosing.
Popular Cargo Management brands
- DirtyDog 4x4 (13)
- Smittybilt (10)
- Curt Manufacturing (10)
- Tuffy (9)
- Energy Suspension (8)
- Hi-Lift Jack (6)
- MasterCraft Safety (4)
- Rhino-Rack USA (4)
- Roll N Lock (4)
- Rampage (4)
- Lockstraps (2)
- Thule (2)
Shop Cargo Management by type
- Tie Down (35)
- Cargo Net (15)
- Universal Tool Storage Boxes (21)
- Cargo Box (2)
Cargo Management FAQ
What is working load limit on a strap?
It is the maximum load a strap is designed to hold in normal use, typically about a third of its break strength. Use it, not break strength, to choose straps, and make sure combined limits exceed the cargo's weight.
How many tie-downs do I need?
It depends on the cargo and local rules, but at least two straps are common for stable loads, with more for large or heavy items. Secure the load against forward, side and backward movement.
Are cargo carriers safe to use on a hitch?
Yes, within limits. Check the receiver size and the hitch's tongue weight rating, include the carrier's own weight, and keep lights and the license plate visible. Follow the carrier maker's instructions.
How do I stop cargo from sliding in a truck bed?
Use anchor points with straps, a cargo net, bed mats or dividers, and place heavy items against the cab. Tie down items so they cannot shift or leave the bed in sudden braking.









