Overview
The Curt Manufacturing 15′ Cambuckle Cargo Straps, part number CRT83015, are a two-pack of dark green 15-foot tie-down straps for securing lighter loads and fragile cargo on a trailer, in a truck bed or inside a vehicle. Each strap uses a cambuckle, a cam-style buckle that lets you tighten the webbing by hand and keep direct control over tension. These are universal cargo straps, not vehicle-specific parts.
Curt positions cambuckle straps as a lightweight alternative to a loose net of bungee cords, which can let a load shift if one cord pops free. The woven nylon webbing is rated for a break strength of 900 lbs. and a work load limit of 300 lbs., so the work load limit is the figure to plan around when you judge how much load a strap will hold.
Key features
- Cambuckle design gives direct control over tightening, which Curt says makes it hard to over-tighten and crush cargo.
- Woven nylon webbing that Curt describes as resistant to stretching and abrasion.
- Rubber-coated S-hooks for a secure hold and resistance to corrosion and wear.
- Dark green straps measuring 15′ long with a 1 inch strap width.
- Lightweight option suited to lighter loads and fragile cargo.
- Two straps included in each package.
Securing cargo safely
Cambuckle straps hold cargo by tension in the webbing, so the tightness you reach at the buckle is what keeps a load in place. Tension can relax as cargo settles or as the webbing stretches a little, so re-check the straps after the first few miles and again at each stop.
Anchor points matter as much as the strap. A strap run at a sharp angle across an edge or over a corner wears faster, so pad sharp edges and route each strap so the pull runs straight to the anchor. Spread the load evenly across the straps rather than relying on one strap to carry most of the weight.
- Keep webbing away from sharp metal edges
- Store straps dry and coiled loosely
- Replace any strap with fraying or a bent hook
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT83015 |
| Strap type | Cambuckle cargo strap |
| Total length | 15′ |
| Strap width | 1 inch |
| Break strength | 900 lbs. |
| Work load limit | 300 lbs. |
| Material | Woven nylon webbing |
| Hook type | Rubber-coated S-hooks |
| Color | Dark green |
| Quantity | 2 straps |
Vehicle fitment
These straps are Universal Fit, so they are not built for a particular make, model or model year. They work as general tie-downs wherever a 15-foot strap with a 300 lbs. work load limit fits the load and the anchor points you have.
Because the straps are not vehicle-specific, the only fit check is length and capacity: measure your anchor spacing and confirm the load weight stays under the work load limit before you use them.
Installation notes
Use the 300 lbs. work load limit, not the 900 lbs. break strength, when judging how much load these cambuckle straps can take. Inspect the nylon webbing and rubber-coated hooks before every trip and retire any strap that shows fraying, cuts or a damaged hook.
What’s included
The package includes two dark green 15′ cambuckle cargo straps with rubber-coated S-hooks.
Not included: anchor points, tie-down rings or other cargo management hardware.









