Overview
The Tuffy 283-01 is a high security rear underseat lockbox made from 16 gauge steel for the Ford F-150 Crew Cab with the subwoofer removed. It mounts under the rear seat without drilling and fits 2009 to 2017 F-150 models.
The lockbox has a full width, form-fitting design with over 4000 cubic inches of lockable storage. Flipping either or both rear seats up opens the matching lid, so secured contents are easy to reach from the cab. The full width suits firearms and other long items. The whole box can be removed in seconds without tools when you need extra floor space or want to store it elsewhere.
Key features
- Full width, form-fitting design with over 4000 cubic inches of lockable storage
- Two rear seat lids: flip either or both seats up to open the corresponding lid
- Welded 16 gauge steel construction
- Pry-Guard Locking System with a 10 tumbler double bitted security lock
- Built-in weather seals on the lock
- Pin-Lock hinge design for added security
- Mounts inconspicuously under the seat, out of apparent sight of would-be thieves
- Durable textured powdercoat finish
Living with an underseat lockbox
A rear underseat lockbox takes up the space under the rear seat, so it trades some passenger floor room for secure storage out of sight. Before loading it, think about how the lids will open with the seats folded up and whether the stored items could block the seat latch or the seat back. Heavy tools and firearm cases should sit low and near the center of the box so the seats still close fully.
Because the box sits in a moving cab, its mounting points absorb repeated vibration from road and trail use. Look over the mounting hardware and the box itself from time to time for loose fasteners, scuffed powdercoat or bent edges. Rust usually begins where the finish has been chipped, so touch up damaged areas soon after they appear.
- Check the lid hinges and latches after rough trail use
- Keep the weather seals clean so grit does not build up around the lock
- Keep heavy items low and close to the center of the box
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 283-01 |
| UPC | 70000597236 |
| Material | Welded 16 gauge steel |
| Finish | Durable textured powdercoat |
| Storage capacity | Over 4000 cubic inches |
| Lock | 10 tumbler double bitted, Pry-Guard Locking System, built-in weather seals |
| Hinge | Pin-Lock hinge design |
| Length | Full length |
| Mounting | Factory hardware, no drilling |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2009 to 2017 Ford F-150 in the trims FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, SSV, STX, SVT Raptor, XL and XLT, for the Crew Cab with the subwoofer removed.
The list does not include 2004 to 2008 or 2018 and later F-150 models, and it does not cover other Ford trucks or SUVs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The box mounts with the factory hardware, so no drilling is needed. The mounting system can only be accessed from inside the box when it is unlocked, which is what allows the whole box to be removed without tools.
Check state and local rules on transporting firearms in a vehicle before storing them in the lockbox.
What’s included
The Tuffy lockbox comes with its mounting hardware.
Not included: a subwoofer. This lockbox is the version made for trucks without one.
















