Overview
The Bilstein 5100 series rear shock, part number 24-276061, is a direct fit shock absorber for lifted trucks and SUVs with a 1 inch lift. It suits 2WD and 4WD models without self-leveling or electronic suspension, and each 5100 shock is tuned for its specific application. It fits the 2001–2007 Toyota Sequoia Limited and SR5.
The 5100 is a monotube shock that offers consistent, fade-free performance. It improves ride quality, handling and comfort on a lifted Sequoia. It has a smooth body design with no separate reservoir rather than a coilover layout.
Key features
- Monotube design that Bilstein says delivers consistent, fade-free performance
- Velocity sensitive, digressive piston that reacts to changing road conditions
- Application specific tuning for the lifted vehicles it is built for
- Smooth body (non-coilover) design with no reservoir
- Zinc plated finish
- It is designed to improve ride quality, handling and comfort.
Before installing a lifted shock
A 1 inch lift changes the geometry of the rear suspension, and the shock is tuned for that height. Before installation, confirm that the truck has no self-leveling or electronic suspension, since those systems work differently. Good shock work starts with a clean inspection of the spring seats, bump stops and mounting bolts so the new unit is not asked to compensate for hidden wear.
Monotube shocks are generally sealed units that work with the rest of the suspension rather than being adjusted at home. If the ride feels harsh or the truck sits off level after installation, have a technician check ride height and the rear suspension angles. Keep the old shock until the new one is fully mounted so you can compare fitment and length.
- Confirm the truck has no self-leveling or electronic suspension
- Inspect spring seats, bump stops and bolts before mounting
- Have ride height checked after installation
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-276061 |
| UPC | 651860807324 |
| Product line | 5100 series |
| Position | Rear |
| Fitment | Direct fit |
| Designed for | 1 inch lifted vehicles |
| Drive | 2WD and 4WD models |
| Self-leveling or electronic suspension | Not for vehicles with this equipment |
| Collapsed length | 15.06 in |
| Extended length | 23.96 in |
| Finish | Zinc plated |
| Reservoir | No |
| Body design | Smooth body (non-coilover) |
Vehicle fitment
It fits the 2001–2007 Toyota Sequoia Limited and SR5. It is a direct fit for 1 inch lifted vehicles.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check that your truck’s lift matches the 1 inch figure in the specifications before ordering, because the shock is tuned for that application. Shock work involves the spring-loaded suspension, so have it installed by a qualified technician.
What’s included
Check the package contents against your installation before starting, including any mounting hardware you need.









