Overview
The Bilstein 24-275002 is a rear shock absorber for 2WD Dodge Ram 1500 trucks without air suspension, from 2009 to 2018, and it is built for lifted trucks with up to 1 inch of rear lift. Bilstein’s B8 5100 line uses a monotube body that the company describes as providing consistent, fade-free performance.
The shock uses a velocity-sensitive, digressive piston that responds to changing road conditions. Bilstein says each B8 5100 shock is tuned for its specific application, which it credits with better ride quality, handling and comfort.
Key features
- Direct fit for rear lifted height up to 1 inch
- Monotube design for consistent, fade-free performance
- Velocity-sensitive digressive piston tuned for each application
- Zinc plated finish on a smooth body
Matching a shock to your lift
Rear shock length and lift are closely linked. A shock works within a range of travel, so its collapsed and extended lengths need to suit the ride height of the truck. Measure your rear height before buying, and compare the shock lengths with the old unit. A shock that is too long or too short can strain its mounts, limit suspension travel or change how the truck settles at rest.
Lifted trucks also gain from balanced suspension parts. Front and rear components are often replaced in the same job, along with leaf springs or coil spring spacers when the lift calls for them. Mounting hardware should be checked for wear and corrosion, since the shock carries load every time the truck moves. Finish with a quick test drive and a visual check after the first few drives.
- Compare collapsed and extended lengths with the old shock
- Check mounting hardware for wear and corrosion
- Recheck fasteners after the first few drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-275002 |
| UPC | 651860807966 |
| Position | Rear |
| Application | 2WD without air suspension |
| Lift height | Up to 1 in |
| Collapsed length | 16.44 in |
| Extended length | 26.04 in |
| Body diameter | 46 mm |
| Finish | Zinc plated |
| Body design | Smooth body |
Vehicle fitment
Fitment covers the 2009-2010 Dodge Ram 1500 (Laramie, SLT, ST, Sport) and the 2011-2018 Ram 1500 (Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Sport, Tradesman, Tradesman HD).
Ram 2500 and 3500 models are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package contains one rear shock absorber. Check the package contents against your installation before starting.









