Overview
The Bilstein 4600 Series rear shock absorber, part number 24-269439, is a gas charged direct fit shock for 2WD Ram 2500 trucks without air leveling suspension. It is for the rear position on stock height light trucks and SUVs, with a 14-Current Ram 2500 2WD model range.
The 4600 Series is a direct fit upgrade for OE shock absorbers. Its monotube design resists fade, and a velocity-sensitive, digressive piston responds to changing road conditions. Each shock is tuned for its application, and the design aims to improve ride quality, handling and comfort.
Key features
- Monotube body that Bilstein says delivers consistent, fade free performance
- Velocity sensitive, digressive piston that reacts to changing road conditions
- Direct fit upgrade for stock height trucks and SUVs
- Smooth, non-coilover body with no reservoir
- Gas charged construction with a yellow finish
Air leveling and fitment checks
Air leveling suspension uses air springs and a compressor to hold ride height under load, so the shock needs to match that setup. A shock built for trucks without air leveling works with the coil or leaf springs used at stock height, and its damping is tuned to that spring rate. Mixing the wrong shock with air springs can change the way the rear end moves over bumps.
Before buying, confirm the truck’s drivetrain, its air leveling status and the trim. Rear shocks are usually replaced in pairs, and worn spring pads or bushings should be checked at the same time. A monotube body keeps the damping oil in one tube, which helps the damping stay steady when the shock heats up on long descents.
- Confirm the truck has no air leveling suspension
- Check that the drivetrain is 2WD
- Inspect rear spring pads and bushings
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-269439 |
| UPC | 651860796796 |
| Shock series | 4600 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Air leveling suspension | Without air leveling suspension |
| Reservoir | No |
| Body design | Smooth body, non-coilover |
| Body diameter | 46 mm |
| Finish | Yellow |
| Hydraulic / gas charged | Gas charged |
| Lift height | 0 in. lift/drop |
Vehicle fitment
It fits 2014–2018 Ram 2500 trucks in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT and Tradesman trims. It also covers 2WD Ram 2500 trucks without air leveling suspension from 2014 on.
Check the year, model and trim against your truck before ordering, and confirm the truck is 2WD without air leveling suspension.
What’s included
The package is the shock absorber only. Make sure any mounting hardware or bushings are on hand before installing.












