Control arms explained: fixed, adjustable or long arm, pinion angle and caster, flex joints, upper arms for IFS, greasing, and which arm suits your…
Long Arm Upgrade
Showing 37–45 of 45 resultsSorted by popularity
-
Long Arm Upgrade
Rubicon Express Extreme-Duty Long Arm Rear Tri-Link Suspension Upgrade Kit – RE7530
Long Arm UpgradeRubicon Express Extreme-Duty Long Arm Rear Tri-Link Suspension Upgrade Kit – RE7530
- Extreme-Duty long arm upgrade for TJ Super-Flex short arm owners
- Chromoly long arms with PT-Meg Super-Ride bushings
- Three-piece belly pan for transfer case access
- Rubicon Long Arm Tri-Link eliminates the rear track bar
- Bolt-on for Dana 35 and Dana 44 rear ends
SKU: R/ERE7530 -
Long Arm Upgrade
Rubicon Express Tri-Link Pivot Ball Assembly – RE4455
- Tri-link pivot ball assembly for a rear three-link suspension kit
- Extra thick threaded insert for adjustment and rebuilding
- UHMW races and a precision machined end ring
- Part number RE4455 from Rubicon Express, silver powder coat
SKU: R/ERE4455 -
-
Long Arm Upgrade
Trail Gear 1.25 Inch Creeper Joint – 110759-KIT
- Trail Gear 1.25 inch creeper joint, part number 110759-KIT
- 1.25 in. thread, 5/8 in. listed size, right thread
- Forged outer shell with an 8620 tool steel flex ball
- Up to 40 degrees of movement when used with spacers
- Includes a jam nut
SKU: TGI110759-KIT -
-
Long Arm Upgrade
Rubicon Express Main Assembly Front Long Arm ZJ – RE9950
- Rubicon Express RE9950 front main assembly for the ZJ long arm system
- Provides the mounting point for the front control arms
- Replaces the factory transmission cross member; welding required
- Black powder coat; UPC 614901442281
SKU: R/ERE9950 -
-
Long Arm Upgrade
Rubicon Express Extreme-Duty Long Arm Suspension Upgrade Kit – RE8330
- Extreme-Duty long arm upgrade for Super-Flex or Super-Ride short arm systems
- Adjustable chromoly long arms
- PT-Meg Super-Ride bushings
- Serviceable Super-Flex spherical ball joints
- Lift height 5 to 6.99 inches; shocks not included
SKU: R/ERE8330 -
Long Arm Upgrade
Rubicon Express Truss Kit Rear Tri-Link LJ 04-06 – RE4410
- Rubicon Express tri-link rear truss kit, part number RE4410
- Converts a rear long arm system to a three-link setup
- Eliminates the rear track bar
- Includes 5/8-inch grade 8 hardware and instructions
- Shocks not included; exhaust modifications required
SKU: R/ERE4410
Why go to a long arm setup
When a vehicle is lifted, short control arms swing through a steeper arc and the axle's position changes, which can hurt ride quality, alignment and travel. Longer arms reduce the arm angle at ride height, which usually gives a smoother ride, better articulation and more consistent axle geometry. They are most common on Jeeps with solid axles, such as TJ, ZJ, XJ and JK models.
Kit types in this category
- Long arm kits: replace the factory lower and upper arms with longer arms and new frame brackets.
- Tri-link rear kits: rear setups using three links and a Panhard or track bar to locate the axle.
- Radius arm upgrades: longer front arms that mount on the frame farther back.
- Flex arms: adjustable arms that improve joint movement and allow pinion and caster adjustment.
- Boxed arms and creeper joints: stronger arms and large-diameter threaded joints for severe use.
What to compare
Look at arm material, such as chromoly or steel, the diameter and wall thickness, and the bushings or joints used. Rubber and polyurethane bushings ride quietly on pavement, while spherical or Heim-style joints give more articulation but can add noise and need more maintenance. Adjustable arms help you set pinion angle and axle position after changing lift height. Also check whether the kit includes frame brackets, hardware, skid plates and a belly pan for transfer case access, as well as which lift heights it supports.
Fitment and related parts
A long arm kit is often tied to a specific lift range and may need matching springs, shocks, track bar and extended brake lines. Driveshaft angles often change, so some builds also need a different driveshaft or a transfer case drop. Check the exact model, wheelbase and body style, because front and rear systems are usually sold for particular generations.
Installation notes
A long arm kit is a major project that often involves cutting off factory brackets, welding in new mounts and setting geometry accurately. Welded mounts are a structural job, so professional installation is strongly recommended. Tighten all joints with the vehicle at ride height, follow the torque specifications, and have the alignment checked afterward. Lift and suspension modifications can be regulated by state, so verify local rules. Confirm fitment for your exact year, make and model.
Planning the whole suspension
Long arms work best as part of a complete plan. Springs, shocks, track bars, steering and driveline must all suit the new geometry, so decide on the target ride height and tire size first. Consider how the arms will affect ground clearance, since low-hanging brackets and belly pans can catch on rocks. Think about maintenance as well: joints that offer extra movement may need periodic greasing, and bushings can wear. Check that brake lines, wiring and the sway bar have enough length for the added travel. Keep a log of settings such as pinion angle, caster and axle centering, because it helps with troubleshooting later. A professional alignment after the installation, followed by a recheck of fastener torque after the first few trail miles, is a wise habit.
Related guides
- Control Arms Explained: Fixed, Adjustable or Long Arm
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
Popular Long Arm Upgrade brands
Long Arm Upgrade FAQ
What is the benefit of long arms over short arms?
Long arms lower the arm angle on a lifted vehicle, which usually improves ride quality, articulation and axle geometry. Short arms can work well on moderate lifts, but they become less ideal as the lift gets taller.
Do long arm kits require welding?
Many do, since they need new frame brackets in different locations. Some bolt-on arm upgrades exist for moderate lifts. Read the kit description, and use a professional fabricator if welding is required.
What is a creeper joint?
A creeper joint is a large threaded joint used at the end of a control arm, sized by thread diameter such as 1 inch or 1.25 inches. It allows heavy-duty articulation. Match the thread size and handedness to the arm.
Will a long arm kit change my driveshaft angles?
It can, because axle position and pinion angle shift. Some installations need an adjustable arm, a driveshaft change or a transfer case drop. The kit's instructions and your lift height should guide those decisions.



