Overview
The Trail Gear 1.25 inch creeper joint, part number 110758-KIT, is a forged rod end built for flexible suspension work. It has a 1.25 in. thread, a 9/16 in. size and a right thread direction. It is a finished, serviceable joint with a single-piece forged shell.
The joint articulates up to 40 degrees when spacers are fitted, and each joint comes with a jam nut.
Key features
- Single forged shell for long service under punishment
- 8620 tool steel flex ball on polyurethane bushings
- Hardened steel washers for the joint assembly
- Up to 40 degrees of articulation with spacers
- Grease fitting on top, plus cross lubrication through the flex ball
Before you install
A creeper joint sits at the end of a flexing link and lets it pivot as the axle travels over uneven ground. On a lifted vehicle the link angle changes more than stock, so a joint with more articulation keeps the link from binding when the suspension cycles. Check that the link end, bolt size and thread engagement match the arm you are replacing before tightening anything.
Rod ends wear in the bushing and flex ball over time. Look for play when you rock the link by hand, a clicking or grinding noise over bumps, or grease that no longer comes out of the fitting. Grease the joint after every few trail outings, and re-check the jam nut after the first runs because it can loosen as the joint settles into service.
- Match thread direction to the link you are replacing
- Use spacers only where the link geometry calls for more travel
- Torque the jam nut once the joint is set
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110758-KIT |
| UPC | 70000621317 |
| Thread | 1.25 in. |
| Size | 9/16 in. |
| Thread direction | Right |
| Joint type | Finished joint, forged |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Articulation | Up to 40 degrees with spacers |
| Maintenance | Serviceable, grease fitting on top |
Vehicle fitment
No vehicle is named for this joint, so fit depends on your link mounts and thread size rather than on model year. Confirm fit for your vehicle’s year, model and trim before ordering, since a link joint does not fit every universal application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Grease the joint through the top fitting, and add spacers where you need the full 40 degrees of movement.
What’s included
One creeper joint with a jam nut.
Not included: Check the package contents against your installation before starting, including spacers and link mount bolts.








