Overview
The Rubicon Express RE7530 is an Extreme-Duty Long Arm Rear Tri-Link upgrade for Jeep Wrangler TJ owners who already run a Rubicon Express Super-Flex short arm system. It is designed to improve on-road handling while keeping a close-to-stock ride, with off-road capability on steep trails.
The tri-link system eliminates the rear track bar, which allows true up and down wheel travel and adds anti-squat for steep climbs. The kit is bolt-on for factory Dana 35 and Dana 44 rear ends. The package includes a three-piece belly pan for transfer case and transmission access, stainless steel rear brake lines and chromoly long arms.
Key features
- Chromoly Extreme-Duty long arms
- PT-Meg Super-Ride bushings
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Three-piece belly pan
- Rear stainless steel brake lines
- Builder Ball misalignment joint with up to 32 degrees of misalignment
Long arm tri-link setup
A long arm tri-link replaces the track bar with a set of arms that locate the axle fore and aft, so the axle moves up and down in a controlled path. This changes how the axle sits under load and how the driveline angles change through travel. Because of that, the setup should be checked as a whole, not one part at a time.
After the arms, bushings and brake lines are installed, check the pinion and driveline angles and confirm the belly pan clears the transfer case and transmission. Make sure the brake lines have slack through full travel. Recheck the fasteners after the first few drives, since new bushings settle as they break in.
- Check pinion and driveline angles after installation
- Confirm belly pan clearance at the transfer case
- Inspect the Builder Ball for play and grease leaks
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7530 |
| UPC | 614901442090 |
| Suspension type | Long arm tri-link |
| Rear axle | Dana 35 or Dana 44 |
| Track bar | Eliminated |
| Misalignment joint | Builder Ball, up to 32 degrees |
| Control arm tubing | Chromoly, 2 by .250 wall, 4130 |
Vehicle fitment
It fits the Jeep Wrangler TJ in the 1997 to 2006 range, for owners who already have a Super-Flex short arm system.
It is for the TJ only, not the LJ or later Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The belly pan is three pieces and must be fitted for transfer case and transmission access. Lift heights depend on the system you are upgrading, so the lift height should be confirmed against the current setup. An alignment and driveline angle check is part of the work.
The package includes the three-piece belly pan and the chromoly control arms. Lift height depends on the system being upgraded. The Builder Ball allows up to 32 degrees of misalignment in a 3-inch OD housing.
What’s included
Chromoly Extreme-Duty long arms, PT-Meg Super-Ride bushings, Super-Flex spherical ball joints, the three-piece belly pan, rear stainless steel brake lines and the Builder Ball misalignment joint.




