Rocker Knockers vs rock sliders: body-mounted armor, frame-mounted rails, load paths, steel gauge, XRC cladding, nerf bars and TJ, JK and JL fitment.
Side Steps & Running Boards
Showing 601–612 of 689 resultsSorted by popularity
-
Power Running Board
Bestop PowerBoard Retractable Electric Running Boards (Black) – 75152-15
- Fits 4-door 2007–2018 Jeep Wrangler Unlimited (JK) models
- Full-length boards with a torsion bar design and a 600 pound load capacity per side
- Drops about 4 inch down and 2 inch out to form a stair-step
- Kit includes two boards, OEM quality motor, controller, hardware, wiring harness and LED Light Kit
SKU: BST75152-15 -
Power Running Board
Bestop PowerBoard Retractable Electric Running Boards (Black) – 75151-15
- Bestop PowerBoard retractable electric running board 75151-15, black
- Fits two-door 2007–2018 Jeep Wrangler JK in the trims listed
- New torsion bar design with 600 pound load capacity per side
- Integrated LED light kit and OEM validated motor
SKU: BST75151-15 -
Power Running Board
Bestop PowerBoard Automatic Running Boards (Black) – 75134-15
- Bestop PowerBoard automatic running board 75134-15, black
- Fits 2008–2016 Ford F-250 and F-350 Super Duty trucks in the trims listed
- Integrated bright LED lights and a 6.25 inch step
- Rated to 600lb per side
SKU: BST75134-15 -
Power Running Board
Bestop PowerBoard Automatic Running Boards (Black) – 75126-15
- Bestop PowerBoard automatic running board 75126-15, black
- Automatic extension with a 6.25 inch step and integrated LED lights
- Rated to 600lb per side
- No vehicle years or models are named for this part number
SKU: BST75126-15 -
Power Running Board
Bestop PowerBoard NX Retractable Electric Running Boards (Black) – 75652-15
- Designed for 4-door 2007–2018 Jeep Wrangler Unlimited (JK) models
- Wireless control with no tap into the factory door wiring
- 6.25 inch step, lowers up to six inches, 600lb per side
- Kit includes two steps, controller, weatherproof motors, LED lights and hardware
SKU: BST75652-15 -
Power Running Board
Bestop PowerBoard NX Retractable Electric Running Boards (Black) – 75651-15
- Designed for 2-door 2007–2018 Jeep Wrangler JK models
- Wireless door controls, so the install avoids the factory wiring harness
- 6.25 inch extra wide step with a 600lb load capacity per side
- Kit includes two steps, wiring harness with controller, weatherproof motors, LED light kit and hardware
SKU: BST75651-15 -
Power Running Board
Bestop PowerBoard NX Retractable Electric Running Boards (Black) – 75638-15
- Bestop PowerBoard NX 75638-15 retractable electric running board, black
- Fits 2011–2018 Ram 1500, 2500 and 3500 trucks in the trims listed
- Patent pending wireless controllers, no connection to factory door wiring
- Includes wireless controllers with a Cab length designation
SKU: BST75638-15 -
Power Running Board
Bestop PowerBoard NX Retractable Electric Running Boards (Black) – 75636-15
- Bestop PowerBoard NX retractable electric running boards, black, part number 75636-15
- Fits 2007–2017 Toyota Tundra in Base, Limited, SR, SR5 and TRD Pro trims
- Cab length, direct fit
- Wireless door controls, no tapping into factory wiring
SKU: BST75636-15 -
Power Running Board
Bestop PowerBoard NX Retractable Electric Running Boards (Black) – 75626-15
- Bestop PowerBoard NX 75626-15 retractable electric running board, black
- Fits 2011–2018 Chevrolet Silverado 1500, 2500 HD and 3500 HD trucks
- Fits 2007–2018 GMC Sierra 1500, 2500 HD and 3500 HD trucks
- Patent pending wireless controllers, no tap into factory door wiring
SKU: BST75626-15 -
Running Board
Body Armor Rockcrawler Side Guards (Black) – TN-4121
- Fits 2007–2013 Toyota Tundra Double Cab in Base, Limited and SR5 trims
- Double step and rocker slider, no drilling needed
- 5MM steel plate with textured black powder coat
- Part number TN-4121, UPC 859909002505
- Poly step pads available separately under B/A5123
SKU: B/ATN-4121 -
Running Board
Body Armor Rockcrawler Side Guards (Chrome Powder Coat) – TC-4121
- Body Armor 4×4 TC-4121 Rockcrawler side guards for Double Cab models
- Formed 5mm thick steel plate with double step areas
- Combination step and slider mounts to the rocker panel
- No cutting or drilling required
- Finish: chrome powder coat per title; black powder coat mentioned in copy
SKU: B/ATC-4121 -
Running Board
Body Armor 4-Door JK RockStep (Black) – JK-4123
- Fits 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Combined double step and rub-rail slider, no-drill bolt-on mounting
- Textured black powder coat finish
- Part number JK-4123, UPC 859909002666
- Step inserts come separately
SKU: B/AJK-4123
Types of side steps
Round nerf bars are tubes, usually 3 inches in diameter, with step pads along the length. Running boards are flat, wide platforms that give more foot room and more coverage against road spray. Step systems such as drop-style or hoop designs place compact steps at the door openings only. Rock sliders with steps use heavier tubing and frame-level mounting for trail protection, and electric steps deploy when a door opens and retract when it closes.
How to choose
Start with how the truck is used. Daily drivers and family vehicles usually benefit from a wide, grippy surface. Trail rigs need clearance, so a tucked-in profile or a slider that sits above the rocker may suit better than a low-hanging board. Sizing details to compare:
- Length: cab length, crew cab, wheel-to-wheel (covering the bed side too) or step-only layouts.
- Finish: gloss black, textured black, powder coat or stainless steel. Textured coatings hide scuffs better than gloss.
- Step surface: cleated, perforated or rubber pads. Look for a surface that drains water and sheds mud.
- Mounting: many listings are described as no-drill or direct fit, using factory holes or existing frame points. Others require drilling.
Fitment and ground clearance
Side steps are vehicle specific. Cab configuration, bed length, door count and sometimes trim level change the bracket design and overall length, so confirm fitment for your exact year, make, model and cab style before choosing a part number. Check the manufacturer's listed mounting points and whether the kit includes brackets.
Consider ground clearance and departure geometry too. A board that hangs low can catch on rocks, ledges and snow ridges, which can bend brackets or dent the body. Steps designed for lifted vehicles may sit higher and use taller brackets.
Installation notes
Most bolt-on kits can be installed with ordinary hand tools in an afternoon, and a helper makes alignment easier. Leave bolts finger tight until every bracket is in place, then tighten to the torque values in the instructions. Rock sliders and any step that mounts to the frame or body structure carry real load, so have a qualified shop do the work if you are unsure. Recheck fasteners after the first few hundred miles and after trail use.
Electric steps also require wiring and a connection to the door switch circuit. Read the instructions closely, or use a shop for the electrical hookup.
Care
Rinse off salt and mud, especially around the brackets, and touch up chips in powder coat to prevent rust. Stainless pieces still benefit from an occasional wipe-down.
Measuring and avoiding mistakes
Before choosing a length, look at your door openings and the distance between wheel wells. Cab-length steps end near the rear of the cab, while longer styles continue behind the rear door. If you tow or carry loads, check that the rear end of the step does not interfere with a trailer hitch, mud flaps or bed side access.
- Do not stack lifts and low steps. After adding a lift or larger tires, the step height changes. A step that suited stock height may now sit too low to clear obstacles, or too far down to be useful.
- Check weight ratings. Steps are meant to carry a person, not to hold up a vehicle. Never use a side step as a jacking point or a recovery anchor, unless the manufacturer says it is designed to be one.
- Look for drainage. Solid surfaces that collect water freeze in winter and collect mud in spring. Cleats or perforations help shed it.
- Pick the finish for your climate. Road salt attacks poorly coated steel, so intact powder coat or stainless matters.
Pairing steps with matching mud flaps, fender flares or bed rails can make the look consistent, though each part should be confirmed for fit separately.
Related guides
- Rocker Knockers vs Rock Sliders: Guarding a Jeep’s Rockers
Popular Side Steps & Running Boards brands
- N-Fab (134)
- AMP-Research (112)
- Smittybilt (106)
- Go Rhino (73)
- Lund (47)
- Westin (44)
- Aries Offroad (38)
- Dee-Zee (26)
- Rock Slide Engineering (20)
- Rampage (17)
- Bestop (17)
- Carr (11)
Shop Side Steps & Running Boards by type
- Nerf Bars & Steps (389)
- Power Running Board (109)
- Running Board (57)
- Rock Sliders (56)
- Running Board Mount Kit (29)
- Running Boards (29)
- Electric Steps & Running Boards (28)
- Trailer Hitch Step (8)
- Rocker Panel Guard Side Step (3)
- Truck Step Pad Hardware (3)
- Running Board Light Kit (2)
- Running Board Light Cover (2)
- Running Board Extension Arm (1)
- Truck Step Mounting Kit (1)
Side Steps & Running Boards FAQ
What is the difference between nerf bars and running boards?
Nerf bars are narrow tubes with step pads. Running boards are wider, flatter platforms that give more foot room and cover more of the rocker area. Nerf bars look sportier and weigh less, while running boards are easier to step onto in dress shoes.
Will side steps fit my truck without drilling?
Many are listed as direct fit or no-drill and use factory holes or frame points, but this depends on the vehicle and the kit. Check the product details and confirm fitment for your exact year, make, model and cab style.
Can I use side steps off-road?
Light-duty steps can be damaged by rocks. For trail use, look at rock sliders or heavier steps that mount to the frame, and consider ground clearance. Follow the manufacturer's rating for how much load the step can hold.
How long should the steps be?
Cab length covers the door openings, and wheel-to-wheel styles run from the front wheel well to the rear wheel well, covering the bed side on trucks. Pick based on look, protection and how much clearance you want at the ends.






