Overview
The Bestop PowerBoard NX, part number 75651-15, is a retractable electric running board for 2-door Jeep Wrangler JK models from 2007 to 2018. It is the wireless-control version of Bestop’s PowerBoard design, so the steps can be installed without tapping into the Jeep’s factory door wiring.
Each step hides underneath the Jeep when the doors are closed and drops down to meet your foot when a door opens. The boards work on the front and rear doors, on both the driver and passenger sides. Each side is rated to hold a load of up to 600lb, and the kit has been climate and salt spray tested to operate in any climate. The kit carries a 3 year/36,000 mile limited warranty.
Key features
- Wireless door controls send signals to the boards, so the install needs no splicing and no contact with the interior.
- Extends down automatically when a door opens and retracts up when that door closes.
- Extruded aluminum 6.25 inch extra wide step with an ultra-durable powder coat and a non-slip textured surface.
- Cast aluminum alloy arms lower the step up to six inches to a comfortable stepping height.
- Integrated LED light kit lights the step, with coated fasteners that resist corrosion.
- Heavy-duty, weatherproof, pressure sensitive, pinch-proof motor for safety.
- The NX kit adds 4 door sensors and a receiver unit on top of the standard PowerBoard features.
- Climate and salt spray tested, with a 600lb load capacity per side.
Things to check before mounting
A two-door Wrangler has a shorter wheelbase and a different door opening than a four-door, so a step built for one body style needs careful checking on the other. Measure the space between the step and the rocker before mounting, and make sure the boards clear the tires at full travel. A step that rubs on the body or tire will wear quickly.
Off-road use adds more demands. Rocks, mud and brush can strike the boards, and a board that is hit may bend or jam. Keep the travel path free of debris, and inspect the arms and fasteners after each trail outing, especially if the Jeep has been driven over rough terrain or through deep water.
The wireless controls simplify wiring, but the boards still need correct power and a sound ground. Look at the connections regularly for corrosion, and keep the connectors sealed so moisture does not reach the contacts.
- Confirm clearance between boards and tires at full travel
- Inspect arms and fasteners after trail use
- Keep connectors sealed against moisture
Specifications
| Brand | Bestop |
|---|---|
| Part number | 75651-15 |
| UPC | 700007703681 |
| Model | PowerBoard NX, wireless door control version |
| Door configuration | 2-door |
| Finish | Black |
| Length | Cab |
| Fitment type | Direct Fit |
| Step width | 6.25 inch |
| Step drop | Up to six inches |
| Load capacity | 600lb per side |
| Warranty | 3 year/36,000 mile limited |
Vehicle fitment
The manufacturer fitment list for this kit covers the 2007–2018 Jeep Wrangler (JK) with the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. The kit itself is built for 2-door models.
Four-door Wrangler Unlimited models use the separate 4-door PowerBoard NX part. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rubicon rock rails must be removed before the boards are mounted. Because the wireless system avoids the factory wiring, the install does not touch door panels, kick panels, kick plates or carpets. Keep hands and feet clear of the steps while the doors open and close, since the boards move on their own.
What’s included
The kit includes two steps, a wiring harness with controller, weatherproof motors, an LED light kit and hardware. The NX wireless version also adds 4 door sensors and a receiver unit.



















