Rocker Knockers vs rock sliders: body-mounted armor, frame-mounted rails, load paths, steel gauge, XRC cladding, nerf bars and TJ, JK and JL fitment.
Side Steps & Running Boards
Showing 673–684 of 689 resultsSorted by popularity
-
Power Running Board
AMP PowerStep Running Boards (Black) – 75125-01A
- Fits the 2007-2014 Chevrolet Suburban and GMC Yukon XL, 2007-2013 Chevrolet Avalanche, and 2007-2014 Cadillac Escalade and Escalade EXT/ESV.
- Electric power running board that extends when the door opens and stows when it closes.
- Rated 600 lb load capacity per side.
- Integrated LED light system, standard; stainless-steel trim is optional.
- Part number 75125-01A, UPC 815410010293, black finish.
SKU: AMP75125-01A -
Power Running Board
AMP PowerStep Running Boards (Black) – 75116-01A
- AMP Research PowerStep power running board in black, part number 75116-01A
- Automatic electric extension when the door opens, retracting when the doors close
- Integrated LED light system as standard, with 600 lb load capacity per side
- Zero-maintenance stainless-steel pivot pins and a textured powder coat finish
- Confirm the year, model and trim for your truck before ordering.
SKU: AMP75116-01A -
Power Running Board
AMP PowerStep Plug N’ Play Running Boards (Black) – 76153-01A
- Fits 2015 to 2017 Chevrolet Colorado and GMC Canyon models.
- Automatic electric running boards that extend when the door opens and stow when it closes
- Part number 76153-01A in black, Cab length, Plug N’ Play design
- Integrated LED light system as standard.
- 5-year/60,000-mile warranty
SKU: AMP76153-01A -
-
-
Power Running Board
Rock Slide Engineering Step Sliders – BD-SS-200-JL4
- Rock Slide Engineering no-drill power step slider, part BD-SS-200-JL4
- Named for the 2018 to current Jeep Wrangler JL four-door
- Factory mount install with no drilling or nutserts
- Step holds up to 650 lb, 12 in drop when deployed
- Trail rated to 5 and below
SKU: RSEBD-SS-200-JL4 -
-
Power Running Board
AMP PowerStep Running Boards – 75163-01A
- Fits the 2007 to 2016 Sprinter. Confirm the make and chassis code of your van before ordering.
- Part number 75163-01A from AMP Research
- Automatic electric extension that deploys when the door opens and retracts when it closes
- 600 lb load capacity per side
- Integrated LED light system as standard; optional stainless-steel trim
SKU: AMP75163-01A -
-
-
Power Running Board
PowerStep™ Xtreme
- Electric running board with dual motors for more power on deploy and retract
- LED lights illuminate the boards when deployed
- Die-cast aluminum components with high-texture powder-coat finish
- Listed Direct Fit, wheel to wheel length
- 5-year 60,000 mile warranty
SKU: AMP78235-01A -
Power Running Board
AMP PowerStep Running Boards (Black) – 75101-01A
- AMP Research PowerStep electric running boards in black
- Integrated LED light system, standard
- 600 lb load capacity per side
- Part number 75101-01A, UPC 815410010156
- Confirm year, model and trim for your vehicle before ordering
SKU: AMP75101-01A
Types of side steps
Round nerf bars are tubes, usually 3 inches in diameter, with step pads along the length. Running boards are flat, wide platforms that give more foot room and more coverage against road spray. Step systems such as drop-style or hoop designs place compact steps at the door openings only. Rock sliders with steps use heavier tubing and frame-level mounting for trail protection, and electric steps deploy when a door opens and retract when it closes.
How to choose
Start with how the truck is used. Daily drivers and family vehicles usually benefit from a wide, grippy surface. Trail rigs need clearance, so a tucked-in profile or a slider that sits above the rocker may suit better than a low-hanging board. Sizing details to compare:
- Length: cab length, crew cab, wheel-to-wheel (covering the bed side too) or step-only layouts.
- Finish: gloss black, textured black, powder coat or stainless steel. Textured coatings hide scuffs better than gloss.
- Step surface: cleated, perforated or rubber pads. Look for a surface that drains water and sheds mud.
- Mounting: many listings are described as no-drill or direct fit, using factory holes or existing frame points. Others require drilling.
Fitment and ground clearance
Side steps are vehicle specific. Cab configuration, bed length, door count and sometimes trim level change the bracket design and overall length, so confirm fitment for your exact year, make, model and cab style before choosing a part number. Check the manufacturer's listed mounting points and whether the kit includes brackets.
Consider ground clearance and departure geometry too. A board that hangs low can catch on rocks, ledges and snow ridges, which can bend brackets or dent the body. Steps designed for lifted vehicles may sit higher and use taller brackets.
Installation notes
Most bolt-on kits can be installed with ordinary hand tools in an afternoon, and a helper makes alignment easier. Leave bolts finger tight until every bracket is in place, then tighten to the torque values in the instructions. Rock sliders and any step that mounts to the frame or body structure carry real load, so have a qualified shop do the work if you are unsure. Recheck fasteners after the first few hundred miles and after trail use.
Electric steps also require wiring and a connection to the door switch circuit. Read the instructions closely, or use a shop for the electrical hookup.
Care
Rinse off salt and mud, especially around the brackets, and touch up chips in powder coat to prevent rust. Stainless pieces still benefit from an occasional wipe-down.
Measuring and avoiding mistakes
Before choosing a length, look at your door openings and the distance between wheel wells. Cab-length steps end near the rear of the cab, while longer styles continue behind the rear door. If you tow or carry loads, check that the rear end of the step does not interfere with a trailer hitch, mud flaps or bed side access.
- Do not stack lifts and low steps. After adding a lift or larger tires, the step height changes. A step that suited stock height may now sit too low to clear obstacles, or too far down to be useful.
- Check weight ratings. Steps are meant to carry a person, not to hold up a vehicle. Never use a side step as a jacking point or a recovery anchor, unless the manufacturer says it is designed to be one.
- Look for drainage. Solid surfaces that collect water freeze in winter and collect mud in spring. Cleats or perforations help shed it.
- Pick the finish for your climate. Road salt attacks poorly coated steel, so intact powder coat or stainless matters.
Pairing steps with matching mud flaps, fender flares or bed rails can make the look consistent, though each part should be confirmed for fit separately.
Related guides
- Rocker Knockers vs Rock Sliders: Guarding a Jeep’s Rockers
Popular Side Steps & Running Boards brands
- N-Fab (134)
- AMP-Research (112)
- Smittybilt (106)
- Go Rhino (73)
- Lund (47)
- Westin (44)
- Aries Offroad (38)
- Dee-Zee (26)
- Rock Slide Engineering (20)
- Bestop (17)
- Rampage (17)
- Carr (11)
Shop Side Steps & Running Boards by type
- Nerf Bars & Steps (389)
- Power Running Board (109)
- Running Board (57)
- Rock Sliders (56)
- Running Board Mount Kit (29)
- Running Boards (29)
- Electric Steps & Running Boards (28)
- Trailer Hitch Step (8)
- Rocker Panel Guard Side Step (3)
- Truck Step Pad Hardware (3)
- Running Board Light Kit (2)
- Running Board Light Cover (2)
- Running Board Extension Arm (1)
- Truck Step Mounting Kit (1)
Side Steps & Running Boards FAQ
What is the difference between nerf bars and running boards?
Nerf bars are narrow tubes with step pads. Running boards are wider, flatter platforms that give more foot room and cover more of the rocker area. Nerf bars look sportier and weigh less, while running boards are easier to step onto in dress shoes.
Will side steps fit my truck without drilling?
Many are listed as direct fit or no-drill and use factory holes or frame points, but this depends on the vehicle and the kit. Check the product details and confirm fitment for your exact year, make, model and cab style.
Can I use side steps off-road?
Light-duty steps can be damaged by rocks. For trail use, look at rock sliders or heavier steps that mount to the frame, and consider ground clearance. Follow the manufacturer's rating for how much load the step can hold.
How long should the steps be?
Cab length covers the door openings, and wheel-to-wheel styles run from the front wheel well to the rear wheel well, covering the bed side on trucks. Pick based on look, protection and how much clearance you want at the ends.












