Replacement Headlights, Tail Lights & Bulbs
Showing 121–132 of 211 resultsSorted by popularity
-
Replacement Headlights, Tail Lights & Bulbs
JW Speaker Model 8800 Evolution 2 Non-Heated LED Headlights – 0552571
Replacement Headlights, Tail Lights & BulbsJW Speaker Model 8800 Evolution 2 Non-Heated LED Headlights – 0552571
- JW Speaker Model 8800 Evolution 2 non-heated LED headlight, part number J/W0552571
- Labeled Universal Fit, with no make, model or years named
- High performance LED design
- Described by JW Speaker as meeting proposed NHTSA guidelines for a 5-Star NCAP-compliant low beam headlight
SKU: J/W0552571 -
Replacement Headlights, Tail Lights & Bulbs
JW Speaker Model 8800 Evolution 2 Non-Heated LED Headlights – 0552551
Replacement Headlights, Tail Lights & BulbsJW Speaker Model 8800 Evolution 2 Non-Heated LED Headlights – 0552551
- JW Speaker Model 8800 Evolution 2 non-heated LED headlight, part number J/W0552551
- JW Speaker lists Universal Fit; no vehicle-specific years, makes or models are given
- Built to meet proposed NHTSA guidelines for a 5-Star NCAP-compliant low beam headlight.
SKU: J/W0552551 -
Replacement Headlights, Tail Lights & Bulbs
JW Speaker Model 8700 Evolution 2R Renegade 7″ LED Headlight (Black) – 0553623
Replacement Headlights, Tail Lights & BulbsJW Speaker Model 8700 Evolution 2R Renegade 7″ LED Headlight (Black) – 0553623
- Direct fit for the 2015–2018 Jeep Renegade in 75th Anniversary, Latitude, Limited, Sport and Trailhawk trims
- 7 Inch round black headlight assembly with LED lighting
- Dual Burn optics combine high and low beam
- Part number J/W0553623
SKU: J/W0553623 -
Replacement Headlights, Tail Lights & Bulbs
JW Speaker Model 8700 Evo J2 Headlight Mounting Ring (Left Hand Side) – 5868181
Replacement Headlights, Tail Lights & BulbsJW Speaker Model 8700 Evo J2 Headlight Mounting Ring (Left Hand Side) – 5868181
- Fits the 2019 Jeep Wrangler (JL) in Rubicon, Sport, Sport S and Unlimited trims
- Single 7 Inch round driver side (left hand) mounting ring
- Polycarbonate housing with a black finish
- Part number J/W5868181, made in the USA
SKU: J/W5868181 -
-
-
Replacement Headlights, Tail Lights & Bulbs
JW Speaker Heated 8700 Evo 2 Dual Burn 7″ Headlight (Black Bezel) – 0556281
Replacement Headlights, Tail Lights & BulbsJW Speaker Heated 8700 Evo 2 Dual Burn 7″ Headlight (Black Bezel) – 0556281
- Universal Fit: JW Speaker lists no specific vehicle, so check the 7-inch round housing before ordering
- JW Speaker Model 8700 Evo 2 Dual Burn 7-inch round LED headlight with black bezel
- SmartHeat heated lens designed to keep the lens clear of snow and ice build-up
- Dual Burn three-part beam: Low Beam, ComfortLite and High Beam
- Part number J/W0556281
SKU: J/W0556281 -
Replacement Headlights, Tail Lights & Bulbs
JW Speaker 8700 Evolution J3 LED Headlights (Black) – 0557213
Replacement Headlights, Tail Lights & BulbsJW Speaker 8700 Evolution J3 LED Headlights (Black) – 0557213
- Heated 7-inch round LED headlight assembly in black, comes as a pair
- Direct fit for 2007–2018 Jeep Wrangler JK, plus listed JL and Gladiator trims
- SmartHeat deicing and J-Link app modes
- JW Speaker part number J/W0557213
SKU: J/W0557213 -
Replacement Headlights, Tail Lights & Bulbs
JW Speaker 8630 Evolution Series Headlight (Black) – 0549911
Replacement Headlights, Tail Lights & BulbsJW Speaker 8630 Evolution Series Headlight (Black) – 0549911
- JW Speaker 8630 Evolution Series LED headlight, part J/W0549911
- Black 5.75 inch round housing
- High and low beam with DRL and front position functions
- Upgraded replacement for 5.75 inch (PAR46) sealed beams
SKU: J/W0549911 -
Types of lighting parts here
The category spans complete assemblies and individual bulbs. Assemblies include sealed or projector headlights, round 7-inch units, LED and halogen tail lights, third brake lights and side or roof markers. Bulbs range from basic incandescent types to halogen, xenon-style halogen and LED replacements. Mounting rings, harnesses and housings for round lamps appear as well.
Choosing a bulb or conversion kit
Start with the bulb base type, such as H7, H11, 9006 or 9012, listed in your owner's manual or on the existing bulb. A wrong base will not seat or lock correctly. LED conversions need more care than direct halogen swaps. A halogen housing has a reflector designed around a filament, so an LED with a poor beam pattern can scatter glare toward oncoming drivers. Projector housings usually control an LED more predictably than reflector housings.
- Look for CAN bus compatibility or resistors if the vehicle flags bulb-out warnings.
- Check that the LED driver or heat sink fits behind the housing.
- Confirm the color temperature, since very blue light often reduces useful output in rain and fog.
Tail lights and brake lights
LED tail lights respond faster than filament bulbs and can use less power. Direct-fit sets plug into the factory connector, while universal units such as heated stop, tail and turn lights usually need a wiring harness. Verify lens color and the legal required functions on your vehicle, including stop, turn, tail and reverse.
Installation and aiming
Many bulb swaps are simple, but assemblies can require removing a grille or bumper cover. Disconnect the battery for wiring work, avoid touching halogen glass with bare fingers, and seal housings correctly to prevent moisture. After installing new headlights, re-aim them so the beam cutoff is correct. Lighting equipment rules, color restrictions and DOT or SAE marking requirements vary by state, so check local regulations. Confirm fitment for your exact year, make and model.
Before buying, compare housing style, lens color, bulb base and connector type across the listings. Keep the old assemblies until the new lights are confirmed working, and check that both sides match in color and brightness after a few weeks of use, since mixed ages of bulbs can look uneven.
Common mistakes to avoid
One mistake is buying a bulb by color alone. Two bulbs with the same base can have different wattage and heat output, and a high-wattage replacement can melt a connector or housing designed for lower power. Another is skipping the aim adjustment, which leaves new lights pointing too high or too low. Check aim against a wall at a measured distance, with the vehicle parked on level ground and at normal load.
Moisture is a frequent failure cause. Leave vent caps open and reseal the back of a housing carefully, and replace worn gaskets rather than reusing them. Put a thin layer of dielectric grease on connectors to resist corrosion, which also helps tail light sockets that have turned green. If a light flickers, check the ground connection before replacing the unit.
Finally, keep in mind that headlights lose clarity with age. A cloudy lens may only need polishing and a UV sealant, not replacement.
Popular Replacement Headlights, Tail Lights & Bulbs brands
- Hella (46)
- Oracle Lighting (39)
- Spyder Auto Group (37)
- Anzo (23)
- Putco (17)
- Recon (16)
- JW Speaker (14)
- Morimoto (6)
- DV8 Offroad (2)
- In Pro Carwear (2)
- ARB 4x4 Accessories (2)
- KC HiLites (1)
Shop Replacement Headlights, Tail Lights & Bulbs by type
Replacement Headlights, Tail Lights & Bulbs FAQ
How do I find my headlight bulb size?
Check the owner's manual, look for the number stamped on the base of the existing bulb, or consult the manufacturer's specifications for your year, make and model. High and low beams may use different bulb types.
Can I put LED bulbs in halogen headlights?
Many people do, but results vary. Halogen reflectors are designed for a filament, so some LED bulbs create glare and a poor beam pattern. Projector housings generally work better, and the beam should be re-aimed after installation.
Why does my vehicle show a bulb-out warning with LEDs?
LEDs draw less current than incandescent bulbs, so the vehicle's monitoring may read a fault. Load resistors or CAN bus compatible bulbs are the usual fix, depending on your vehicle.
Are replacement tail lights legal?
Rules differ by state. Generally lights need the correct colors, brightness and functions and often DOT or SAE markings. Check your local regulations before replacing factory lights with aftermarket designs.




