Overview
The JW Speaker J/W0557213 is the Model 8700 Evolution J3 (EVO J3) LED headlight in black. It is a 7-inch round heated headlight assembly sold as a pair. It is a direct fit for 2007 and later Jeep Wrangler JK and Wrangler Unlimited, and it fits the 2018–2019 Jeep Wrangler JL and 2020–2026 Jeep Gladiator trims shown below.
The EVO J3 is an asymmetrical LED headlight with a built-in turn signal for each lamp. Each kit includes two asymmetrical headlights and two wire harnesses. The lamps are sealed to IP69K against dust and water. The Trail 6 Pro is a separate product that pairs with these lights for extra power and control off-road.
Key features
- Built-in turn signal in each LED headlight
- SmartHeat: a heating system built into the lamp senses ambient temperature and turns on to deice the lens
- J-Link Bluetooth control through the J-Link app for iOS and Android, with Off-Road, Guide and Party modes
- Sealed to IP69K for protection against dust and water
- Two asymmetrical headlights with two wire harnesses for plug-and-play installation
Heated lamps and wiring
Heated headlights use a small heater behind the lens to clear frost and light condensation, which helps visibility on cold mornings. Lamps with built-in heating draw more current than standard lamps, so the wiring should be protected and the circuit should suit the load.
Waterproof sealing protects the electronics from dust, mud and spray, but connectors still need care. Keep the plugs dry, use dielectric grease on contacts, and check for corrosion at the connector after the first season of trail use.
Off-road use exposes headlight housings to rocks and branches, so inspect the lens for cracks after trail runs. Re-check the mounting bolts after the first few trips, since vibration can loosen them over time.
- Route harnesses away from heat and moving parts
- Use a fuse sized for the lamp load
- Check the Bluetooth module connection after wiring
Specifications
| Brand | JW Speaker |
|---|---|
| Part number | J/W0557213 |
| Model series | Model 8700 Evolution J3 Series (EVO J3) |
| Type | Headlight assembly, LED |
| Color | Black |
| Size | 7 inches round |
| Heated | Yes, SmartHeat lens heating |
| Quantity | Pair (2 headlights) |
| Wire harnesses | 2 |
| Sealing | IP69K |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list covers three groups: 2007–2018 Jeep Wrangler (JK) in the 2-door and Unlimited 4-door trims including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X; 2018–2019 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S; and 2020–2026 Jeep Gladiator in Overland, Rubicon, Sport and Sport S.
The JL range on the list ends at 2019, and Wrangler JK years before 2007 are not shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect the battery before working on headlight wiring, and power the heated lamps through a fused circuit. Confirm connector types, mounting steps and tools against your vehicle before starting.
What’s included
A pair of EVO J3 LED headlights in black, with two wire harnesses.
Not included: The Trail 6 Pro, which JW Speaker suggests pairing with these lights for extra power and control off-road, is a separate product.













