Overview
The JW Speaker 8415 Series DOT headlight assembly, part J/W0552031, is a clear LED round headlight measuring 4 inches by 6 inches, built on the Evolution Series design. It is the updated version of the 8415 Series.
It is a universal fit assembly, so it is not matched to a specific model. Measure your headlight opening before ordering.
Key features
- Evolution Series design
- LED light source
- Lightweight and durable platform
- Round housing shape
Wiring LED headlights safely
LED headlight wiring is a load-bearing circuit, so it should run from the battery through a fuse and relay, with the headlight switch only triggering the relay. This keeps current off the factory switch and reduces heat at the connectors. Choose wire thick enough for the load and keep runs short.
Route the wiring away from hot exhaust parts, sharp edges and moving suspension components. Use weatherproof connectors and secure the loom with clips, so the harness does not rub through as the vehicle moves.
Before you drive, test the low beam, high beam and any parking light separately. Check the aim on level ground, since the new unit can sit at a different angle. If the lamp flickers or a warning appears, inspect the relay and ground first.
- Fuse the feed close to the battery
- Trigger the relay from the headlight switch
- Secure the loom clear of heat and moving parts
- Test each function before driving
Specifications
| Brand | JW Speaker |
|---|---|
| Part number | J/W0552031 |
| Series | 8415 Series |
| Light source | LED |
| Lens color | Clear |
| Shape | Round |
| Size | 4 inches x 6 inches |
| Fitment type | Universal Fit |
Vehicle fitment
Fit depends on the 4 inch by 6 inch size. Compare the assembly with your current headlight before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Run LED headlight wiring through a fused relay and check local road-use rules for headlights before installing this assembly.
What’s included
One clear LED headlight assembly.
Not included: Plan for brackets, relays and wiring separately, and check your installation for those parts before starting.









