Lighting & Lighting Accessories
Showing 961–972 of 2467 resultsSorted by popularity
-
Light Mounting Brackets & Cradles
Rigid Industries R2-46 Driving Light Kit – 83351
- Rigid Industries R2-46 Driving Light Kit, part number 83351
- R-Series 46 round light with Spot, Hyperspot, Flood, Combo, Driving and Wide beam patterns
- Universal fit, so not vehicle-specific
- Curved lens, curved housing and advanced heat sink
SKU: RIG83351 -
Offroad Racing
M-Series 10 Deg. Spot/20 Deg. Flood Combo LED Light
- Rigid Industries 810313, a 10-inch LED light bar with 10 Deg. spot and 20 Deg. flood combo optics
- Universal fit: not tied to a specific vehicle model
- Bulb type LED, clear lens, bracket mounting
- Sold as a single light bar; wiring and relay not listed
SKU: RIG810313 -
Offroad Racing
M-Series 10 Deg. Spot/20 Deg. Flood Combo LED Light
- Universal fit combo light with a 10 degree spot and 20 degree flood beam
- Rigid Industries part number 806313, 6 inch size
- Up to 111% more raw lumens per Rigid Industries line figures
- Blacked-out circuit boards and refreshed branding
- Clear lens, LED bulbs, bracket mount, sold as a single
SKU: RIG806313 -
Offroad Racing
E-Series Pro Spotlight
- Universal fit light bar, not matched to a specific vehicle
- Rigid Industries E-Series PRO, part number 806213, 6 inch size
- Up to 111% more raw lumens from the PRO LED design.
- Spot, Flood, Driving, Hyperspot and Diffused optic options
- Clear lens, LED bulb type, bracket mount, sold as a single
SKU: RIG806213 -
-
-
Offroad Racing
M-Series Dually D2 60 Deg. Diffusion LED Light
- Rigid Industries M-Series Dually D2 60 Deg. Diffusion LED light, part 712513, a single LED pod
- Universal fit; bracket mounting with a 0 to 10 inch size range
- Side-shooting LEDs widen the beam, up to 120 degrees horizontal coverage
- Wiring must be sourced separately, since no harness or switch is included.
SKU: RIG712513 -
Offroad Racing
M-Series Dually D2 60 Deg. Diffusion LED Light
- Rigid Industries M-Series Dually D2 60 Deg. Diffusion LED light, part 711513, a single D-SS PRO pod
- Universal fit with no named vehicle; bracket mounting and a 0 to 10 inch size range
- Side-aimed LEDs on both sides of the fixture for a broader beam
- Up to 120 degrees horizontal coverage when used as singles or in pairs
SKU: RIG711513 -
Offroad Racing
M-Series Dually D2 60 Deg. Diffusion LED Light
- Rigid Industries M-Series Dually D2 60 Deg. Diffusion LED light, part 702513, a side-shooter LED pod
- Universal fit set of 2 with bracket mounting and a 0 to 10 inch size range
- Up to 120 degrees horizontal coverage and up to 102% more raw lumens depending on optics
- Forward LEDs offered with Spot, Flood or Driving optics
SKU: RIG702513
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.











