Overview
The Rigid Industries M-Series Dually D2 60 Deg. Diffusion LED light, part number 712513, is a single LED pod with side-shooting LEDs for wide spread beams. It is the D-SS PRO Dually-Side Shooter, a professional race output pod for A-pillars, fog lights and motorcycle applications. Fitment is universal, so no particular vehicle applies.
Each single unit has a pair of side-shooting LEDs on both sides of the fixture. The forward LEDs come with Spot, Flood or Driving optics, and the fixture reaches up to 120 degrees of horizontal coverage. It also gives up to 102% more raw lumens depending on the optics chosen.
Key features
- Side-shooting LEDs on both sides of a single fixture
- Up to 102% more raw lumens depending on optics chosen
- Up to 120 degrees horizontal lighting coverage
- Forward optics available as Spot, Flood or Driving
- Clear lens, LED bulb type and square light shape
- Bracket mount with a 0 to 10 inch size range
Reading the beam on the trail
Side-shooting LEDs change how a single pod lights the ground near the vehicle. They fill the edges of the path, which helps on tight trails where obstacles sit beside the tires. Reading that edge light takes some practice, so spend time on familiar ground to see how the spread falls on gravel, mud and pavement.
Light on wet or dusty surfaces can reflect back and cause glare, so aim the pod slightly below the horizon when conditions are poor. A clean lens keeps the spread even. Check the mount after rough sections, since vibration can slowly rotate the bracket and change where the beam lands.
- Practice on familiar ground first
- Aim slightly low in fog or dust
- Clean the lens before night use
- Recheck the bracket after rough sections
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 712513 |
| UPC | 849774027413 |
| Product line | M-Series Dually D2 (D-SS PRO) |
| Optic in title | 60 Deg. Diffusion |
| Forward optic options | Spot, Flood or Driving |
| Lens color | Clear |
| Bulb type | LED |
| Light shape | Square |
| Mounting type | Bracket |
| Size | 0 to 10 inches |
| Horizontal coverage | Up to 120 degrees |
| Raw lumen output | Up to 102% more, depending on optics chosen |
| Packaging | Single |
Vehicle fitment
No vehicle-specific fitment applies. Rigid marks this pod universal fit, and its described uses are A-pillars, fog lights and motorcycles, so placement follows the application.
Confirm your vehicle’s year, model and trim before ordering. Measure the bracket position on your own mounting surface, since no vehicle list is given.
Installation notes
Wire the single light through a fuse and a relay with a switch, since no harness is included. Set the aim on a level surface before fully tightening the bracket. Check local road-use rules before mounting an auxiliary light where other drivers will see it.
What’s included
Packaged as a single light with bracket mounting.
Not included: A harness and switch are not included, so budget for separate wiring.









