Overview
The Rigid Industries M-Series 10 Deg. Spot/20 Deg. Flood Combo LED Light, part number 806313, pairs a 10 degree spot pattern with a 20 degree flood pattern. It is a 6 inch universal-fit light with a bracket mount and clear lens.
The combo is part of Rigid Industries’ E-Series PRO family, which uses newer LED technology for up to 111% more raw lumens. It has updated branding and blacked-out circuit boards. The line suits off-road, power sports, marine, general automotive and first responder work, and the combo beam covers both focused reach and wide fill.
Key features
- 10 degree spot and 20 degree flood combination beam
- Up to 111% more raw lumens for the line.
- New blacked-out circuit boards for a refined look
- Clear lens with LED bulbs
- Bracket mount for a 6 inch light
- Universal fit, sold as a single unit
Combo beam tradeoffs
A combo beam pairs a narrow spot with a wider flood, so one housing can reach far down a trail and still light the ground beside the vehicle. The spot does most of the reach work, while the flood handles near-field tasks such as hitching, tire changes and campsite setup. Because the spot is narrow, the mounting angle matters more than on a flood-only light. Set the aim with the vehicle parked on level ground and check it again after the first longer drive.
Combo lights are often chosen as a single fixture when space is tight. Keep the lens clean, since dirt scatters the spot more than the flood. Bracket tension should be rechecked after rough terrain so the aim does not drift during use.
- Aim with the vehicle level
- Clean the lens regularly
- Recheck bracket tension after rough roads
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 806313 |
| UPC | 849774029332 |
| Beam pattern | 10 degree spot and 20 degree flood combo |
| Bulb type | LED |
| Lens color | Clear |
| Size | 6 inch |
| Mounting type | Bracket |
| Fitment | Universal fit |
| Sold as | Single |
Vehicle fitment
This combo light is universal fit and is not tied to one year, make or model. It can be mounted on off-road vehicles, power sports craft, boats and general automotive applications where a bracket and a clear mounting position are available.
The spot pattern is narrow, so position the light with the beam direction in mind. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the spot and flood aim before tightening the bracket, and check the beam angle against the area you need to light. Power the light through a fused relay and check local rules for auxiliary lights, which vary by location and by whether the vehicle is used on public roads.
What’s included
Sold as a single combo light. Check the package contents against your installation before starting, and plan for a power harness, relay and switch.
Not included: A power harness, relay and switch must be sourced for the install.









