Overview
The Rigid Industries 804513 is a single M-Series 60 Deg. Diffusion LED light bar from the E-Series PRO family. Its 60 degree diffusion beam gives wide, even coverage. It is a universal-fit bar, so no vehicle, year or model is assigned to it.
The E-Series PRO line uses LED upgrades for up to 111% more raw lumens, with blacked-out circuit boards for a refined look. Beam options include Spot, Flood, Driving, Hyperspot, Diffused and new Driving/Spot and Spot/Hyperspot combinations. The line began in off-road use and also suits powersports, marine, automotive and first responder work.
Key features
- 60 Deg. Diffusion beam pattern
- Up to 111% more raw lumens.
- Light bar form with bracket mounting
- Clear lens with LED bulb type
- Optics range includes Spot, Flood, Driving, Hyperspot, Diffused and combinations
- Blacked-out circuit boards
- Single unit
Mounting and aiming basics
Mounting a light bar well comes down to a solid bracket and a clear view of the road. Check that the mounting surface can carry the bar’s weight and vibration, and fit any backing plates before tightening. Aim is best set on level ground against a wall or marked line at a set distance, then rechecked after the first few runs on rough terrain. Wiring should run through a fused relay and be secured away from moving parts and sharp edges.
Diffuse beams spread light across a wide area, which suits close work and trail edges better than long reach. If you add other lights later, plan the relay and switch capacity together so the circuit is not overloaded.
- Re-check bracket bolts after the first trail runs
- Keep the lens clean for consistent output
- Seal connectors against water and dust
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 804513 |
| UPC | 849774029301 |
| Beam pattern | 60 Deg. Diffusion |
| Output | Up to 111% more raw lumens. |
| Lens color | Clear |
| Bulb type | LED |
| Type | Light bar |
| Mounting type | Bracket |
| Size | 0″ to 10″ |
| Sold as | Single |
Vehicle fitment
It is universal fit, so it is not built for one vehicle. Measure the mounting space and check the beam position on your own vehicle before installing.
Application examples across the E-Series line are general uses, not confirmed vehicle matches.
Installation notes
Mount the bracket to a firm surface and set the aim before final tightening. Wire the bar through a fused relay and switch, and check local rules for auxiliary lights before road use.
What’s included
A single light bar. Check the package contents against your installation before starting, and plan for wiring and a switch separately.









