Overview
The ICON Vehicle Dynamics ICO95155 is a bracket kit for mounting a KC Pro6 LED light bar, in its 7-light configuration, to an ICON Impact Series front bumper on the 2017–2021 Ford F-150 Raptor. The kit is built for that bumper and that light bar, so both are needed for a complete setup.
The brackets are laser cut from 3/16-inch steel and powder coated to a semi-gloss black finish. The kit includes provisions for the Pro6’s integrated center support, which the bracket is designed to accommodate.
Key features
- Accommodates the Pro6’s integrated center support
- 3/16-inch laser cut steel construction
- Semi-gloss black powder coat finish
- All necessary hardware included
- Designed for the ICON Impact Series front bumper
Pairing the bumper and light bar
A bracket kit only works as part of a matched system, so the bumper, light bar and bracket should be confirmed together before ordering. The bracket must line up with the light bar’s center support, and the mounting holes need to match the bumper, so check each part against the others before installing.
Steel brackets with a semi-gloss powder coat handle the weight of a light bar well, but the finish can chip from stone strikes. Touch up chips promptly to slow rust. Recheck the fasteners after the first off-road trips, and inspect the wiring for chafing where it runs near the bumper edges.
- Confirm the bumper part number before installing
- Check the center support alignment
- Recheck fasteners after early trips
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO95155 |
| Material | 3/16-inch laser cut steel |
| Finish | Semi-gloss black powder coat |
| Color | Black |
| Light bar compatibility | KC PRO6, 7-light configuration |
| Required bumper | ICON Impact Series Front Bumper, part 95150 or 95153 |
| Hardware | All necessary hardware included |
Vehicle fitment
The manufacturer fitment list covers the 2017–2021 Ford F-150 Raptor only.
Other F-150 trims are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is designed for the ICON Impact Series front bumper, so confirm the bumper part number before installing. Because the Pro6 has an integrated center support, the bracket’s provisions for that support must line up with the light bar. Auxiliary lights need fused relay wiring, and local road-use rules apply.
What’s included
Bracket kit with all necessary hardware for installation.
Not included: The KC PRO6 light bar with 7 lights, and the ICON Impact Series Front Bumper (part 95150 or 95153).










