Overview
The Rigid Industries 40336 is a lower bumper mount kit for a 20-inch SR-Series light bar, made for the 2009–2013 Chevrolet Silverado 1500 and the 2008–2010 Chevrolet Silverado 2500 HD and 3500 HD. The light bar is not included with the kit, so the bracket is the part that positions the light on the front bumper.
The bracket is made from powder-coated stainless steel. It reuses the factory mounting hardware, so installation needs no drilling or cutting.
Key features
- Lower bumper placement for a 20-inch SR-Series light bar
- Reuses existing mounting hardware
- No drilling or cutting required
- Powder-coated stainless steel construction
- Installs with basic hand tools
- Includes all necessary hardware
Wiring a lower bumper light
A lower bumper bracket places a light bar close to the ground, which gives a wide spread of light for close-range work on trails. Lower placement also means the light bar takes more road spray and trail debris, so inspect the mount, the lens and the wiring connections after wet or muddy drives.
Good wiring practice matters more than the mount itself. Use a fused circuit sized for the light, keep the power leads away from hot exhaust parts, and fit a relay so the bar draws power from the battery rather than the switch. Look for chafed insulation and corroded connectors during regular checks.
- Inspect mount bolts after rough trail use
- Use a fused relay for the light bar
- Check connectors for corrosion each season
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40336 |
| UPC | 849774002236 |
| Mount location | Front, lower bumper |
| Material | Stainless steel |
| Finish | Black powder coat |
| Light bar compatibility | 20-inch SR-Series |
| Made in | USA |
| Warranty | Limited lifetime |
Vehicle fitment
The manufacturer fitment list for this kit covers the 2009–2013 Chevrolet Silverado 1500 in the Hybrid, LS, LT, LTZ, WT and XFE trims, and the 2008–2010 Chevrolet Silverado 2500 HD and 3500 HD in the LT, LTZ and WT trims.
Other model years and trims are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Basic hand tools are all that installation needs. Light bars draw real current, so wire the light through a fused circuit and check local rules on auxiliary lights before road use.
What’s included
The kit includes the lower bumper mount bracket and all necessary hardware for installation.
Not included: The 20-inch SR-Series light bar and any lights.









