Overview
The Go Rhino BR10 Light Plate is a front light plate that adds a Rigid D-Series flush mount light to a BR5 or BR10 bumper replacement. It is used with front replacement bumper part number 24173T.
The plate is made from textured black mild steel and comes as a pair. It is designed for Rigid D-Series Dually lights and other compatible flush-mount lights, which are not included.
Key features
- Front location for a flush-mount light
- Textured black mild steel construction
- Supplied as a pair
- Designed for Rigid D-Series Dually and compatible flush-mount lights
- For the BR5 or BR10 bumper replacement
Mounting a flush light on steel
Flush-mount lights sit close to the bumper face, so the mounting surface matters. Steel plates give a rigid base for a flush light and resist flexing on rough ground. Check the plate edges for burrs before fitting so wiring and hardware are not damaged, then dry-fit the light to confirm it sits level and that the lens clears the bumper contour.
Textured black helps hide minor scratches, but stone strikes can still chip the coating. Touch up exposed steel with matching paint to slow rust, especially at drilled holes and fastener heads. Run light wiring through a fused relay with a cab switch so the light can be turned off when it is not needed.
- Deburr cut edges and drilled holes before installing
- Touch up chips in the coating to limit surface rust
- Recheck hardware after the first few off-road trips
Specifications
| Brand | Go Rhino |
|---|---|
| Model | BR10 Light Plate |
| UPC | 887753087089 |
| Material | Mild steel |
| Finish | Textured black |
| Location | Front |
| Quantity | Pair |
| Compatible bumper | BR5 or BR10 bumper replacement, front replacement bumper part number 24173T |
Vehicle fitment
It fits the BR5 or BR10 bumper replacement, front replacement part number 24173T. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fused relay wiring is advisable for the flush-mount light, and local road-use rules apply to auxiliary lights.
What’s included
- A pair of light plates
Not included: Rigid D-Series flush mount lights and the BR5 or BR10 bumper replacement.









